> -----Original Message-----
> From: ffmpeg-devel <ffmpeg-devel-boun...@ffmpeg.org> On Behalf Of Andreas
> Rheinhardt
> Sent: 2024年3月6日 22:19
> To: ffmpeg-devel@ffmpeg.org
> Subject: Re: [FFmpeg-devel] [PATCH] avcodec/libx264: fix extradata when
> config annexb=0
>
> Zhao Zhili:
> > From: Zhao Zhili <zhiliz...@tencent.com>
> >
> > ---
> > configure | 2 +-
> > libavcodec/libx264.c | 148 ++++++++++++++++++++++++++++++++++++-------
> > 2 files changed, 125 insertions(+), 25 deletions(-)
> >
> > diff --git a/configure b/configure
> > index bbf1a70731..ef58c3fe97 100755
> > --- a/configure
> > +++ b/configure
> > @@ -3491,7 +3491,7 @@ libwebp_encoder_deps="libwebp"
> > libwebp_anim_encoder_deps="libwebp"
> > libx262_encoder_deps="libx262"
> > libx264_encoder_deps="libx264"
> > -libx264_encoder_select="atsc_a53"
> > +libx264_encoder_select="atsc_a53 h264parse"
> > libx264rgb_encoder_deps="libx264"
> > libx264rgb_encoder_select="libx264_encoder"
> > libx265_encoder_deps="libx265"
> > diff --git a/libavcodec/libx264.c b/libavcodec/libx264.c
> > index 10d646bd76..10dfda125d 100644
> > --- a/libavcodec/libx264.c
> > +++ b/libavcodec/libx264.c
> > @@ -34,9 +34,12 @@
> > #include "avcodec.h"
> > #include "codec_internal.h"
> > #include "encode.h"
> > +#include "get_bits.h"
> > +#include "h264_ps.h"
> > #include "internal.h"
> > #include "packet_internal.h"
> > #include "atsc_a53.h"
> > +#include "put_bits.h"
> > #include "sei.h"
> >
> > #include <x264.h>
> > @@ -865,6 +868,124 @@ static int convert_pix_fmt(enum AVPixelFormat pix_fmt)
> > return 0;
> > }
> >
> > +static int set_avcc_extradata(AVCodecContext *avctx, x264_nal_t *nal, int
> > nnal)
> > +{
> > + x264_nal_t *sps_nal = NULL;
> > + x264_nal_t *pps_nal = NULL;
> > + GetBitContext gbc;
> > + PutBitContext pbc;
> > + H264ParamSets ps = { 0 };
> > + uint8_t *p;
> > + int ret, profile;
> > +
> > + /* We know it's in the order of SPS/PPS/SEI, but it's not documented
> > in x264 API.
> > + * The x264 param i_sps_id implies there is a single pair of SPS/PPS.
> > + */
> > + for (int i = 0; i < nnal; i++) {
> > + if (nal[i].i_type == NAL_SPS)
> > + sps_nal = &nal[i];
> > + else if (nal[i].i_type == NAL_PPS)
> > + pps_nal = &nal[i];
> > + }
> > + av_assert0(sps_nal);
> > + av_assert0(pps_nal);
>
> We should never assert on the output of external libraries.
Ok, will just remove the assert. I don't think a check is needed.
>
> > +
> > + // +11 for AVCDecoderConfigurationRecord, will shrink to the real size
> > finally
> > + avctx->extradata_size = sps_nal->i_payload + pps_nal->i_payload + 11;
> > + avctx->extradata = av_mallocz(avctx->extradata_size +
> > AV_INPUT_BUFFER_MIN_SIZE);
>
> AV_INPUT_BUFFER_PADDING_SIZE
Oops.
>
> > + if (!avctx->extradata)
> > + return AVERROR(ENOMEM);
> > +
> > + // Skip size part
> > + p = sps_nal->p_payload + 4;
> > + init_get_bits8(&gbc, p, sps_nal->i_payload - 4);
> > + skip_bits(&gbc, 8);
> > + ret = ff_h264_decode_seq_parameter_set(&gbc, avctx, &ps, 0);
>
> This is completely overblown. You only read three fields: profile_idc,
> the constraint fields and level_idc. All three are at the start of the
> SPS and occupy a whole byte, so there is no need for a GetBitContext at all.
> (Yes, I am aware of the hypothetical scenario in which we could have a
> 0x03 escape byte before level_idc (in case of a hypothetical future
> profile zero), but even then using ff_h264_decode_seq_parameter_set() is
> overblown.)
You missed chroma_format_idc, bit_depth_luma/bit_depth_chroma.
I can get that from pixel format, but there are a lot of them.
>
> > + if (ret < 0)
> > + return ret;
> > +
> > + for (int i = 0; i < FF_ARRAY_ELEMS(ps.sps_list); i++) {
> > + if (ps.sps_list[i]) {
> > + ps.sps = ps.sps_list[i];
> > + break;
> > + }
> > + }
> > +
> > + // Now create AVCDecoderConfigurationRecord
> > + init_put_bits(&pbc, avctx->extradata, avctx->extradata_size);
> > + put_bits(&pbc, 8, 1); // version
> > + put_bits(&pbc, 8, ps.sps->profile_idc); // AVCProfileIndication
> > + put_bits(&pbc, 8, ps.sps->constraint_set_flags); //
> > profile_compatibility
> > + put_bits(&pbc, 8, ps.sps->level_idc); // AVCLevelIndication
> > + put_bits(&pbc, 11, 0x7FF);
> > +
> > + p = sps_nal->p_payload + 4;
> > + put_bits(&pbc, 5, 1); // numOfSequenceParameterSets
> > + put_bits(&pbc, 16, sps_nal->i_payload - 4); //
> > sequenceParameterSetLength
>
> I also think that using a PutBitContext is overblown here (most fields
> don't cross a byte-boundary, the bit-alignment of every field is fixed),
> in particular if you copy the NALUs eight bits at a time:
It's readable, close related to the spec, and it counts how many bytes actually
used
automatically. I choose it for these convenience over performance.
>
> > + for (int i = 0; i < sps_nal->i_payload - 4; i++)
> > + put_bits(&pbc, 8, p[i]);
> > +
> > + p = pps_nal->p_payload + 4;
> > + put_bits(&pbc, 8, 1); // numOfPictureParameterSets
> > + put_bits(&pbc, 16, pps_nal->i_payload - 4); //
> > pictureParameterSetLength
> > + for (int i = 0; i < pps_nal->i_payload - 4; i++)
> > + put_bits(&pbc, 8, p[i]);
> > +
> > + profile = ps.sps->profile_idc;
> > + if (profile != 66 && profile != 77 && profile != 88) {
> > + put_bits(&pbc, 6, 0x3F);
> > + put_bits(&pbc, 2, ps.sps->chroma_format_idc);
> > + put_bits(&pbc, 5, 0x1F);
> > + put_bits(&pbc, 3, ps.sps->bit_depth_luma - 8);
> > + put_bits(&pbc, 5, 0x1F);
> > + put_bits(&pbc, 3, ps.sps->bit_depth_chroma - 8);
> > + put_bits(&pbc, 8, 0);
> > + }
> > + flush_put_bits(&pbc);
> > + avctx->extradata_size = put_bytes_output(&pbc);
> > +
> > + ff_h264_ps_uninit(&ps);
> > +
> > + return 0;
> > +}
> > +
> > +static int set_extradata(AVCodecContext *avctx)
> > +{
> > + X264Context *x4 = avctx->priv_data;
> > + x264_nal_t *nal;
> > + uint8_t *p;
> > + int nnal, s;
> > +
> > + s = x264_encoder_headers(x4->enc, &nal, &nnal);
> > + if (s < 0)
> > + return AVERROR_EXTERNAL;
> > +
> > + if (!x4->params.b_annexb)
> > + return set_avcc_extradata(avctx, nal, nnal);
> > +
> > + avctx->extradata = p = av_mallocz(s + AV_INPUT_BUFFER_PADDING_SIZE);
> > + if (!p)
> > + return AVERROR(ENOMEM);
> > +
> > + for (int i = 0; i < nnal; i++) {
> > + /* Don't put the SEI in extradata. */
> > + if (nal[i].i_type == NAL_SEI) {
> > + av_log(avctx, AV_LOG_INFO, "%s\n", nal[i].p_payload + 25);
> > + x4->sei_size = nal[i].i_payload;
> > + x4->sei = av_malloc(x4->sei_size);
> > + if (!x4->sei)
> > + return AVERROR(ENOMEM);
> > + memcpy(x4->sei, nal[i].p_payload, nal[i].i_payload);
> > + continue;
> > + }
> > + memcpy(p, nal[i].p_payload, nal[i].i_payload);
> > + p += nal[i].i_payload;
> > + }
> > + avctx->extradata_size = p - avctx->extradata;
> > +
> > + return 0;
> > +}
> > +
> > #define PARSE_X264_OPT(name, var)\
> > if (x4->var && x264_param_parse(&x4->params, name, x4->var) < 0) {\
> > av_log(avctx, AV_LOG_ERROR, "Error parsing option '%s' with value
> > '%s'.\n", name, x4->var);\
> > @@ -1233,30 +1354,9 @@ FF_ENABLE_DEPRECATION_WARNINGS
> > return AVERROR_EXTERNAL;
> >
> > if (avctx->flags & AV_CODEC_FLAG_GLOBAL_HEADER) {
> > - x264_nal_t *nal;
> > - uint8_t *p;
> > - int nnal, s, i;
> > -
> > - s = x264_encoder_headers(x4->enc, &nal, &nnal);
> > - avctx->extradata = p = av_mallocz(s +
> > AV_INPUT_BUFFER_PADDING_SIZE);
> > - if (!p)
> > - return AVERROR(ENOMEM);
> > -
> > - for (i = 0; i < nnal; i++) {
> > - /* Don't put the SEI in extradata. */
> > - if (nal[i].i_type == NAL_SEI) {
> > - av_log(avctx, AV_LOG_INFO, "%s\n", nal[i].p_payload+25);
> > - x4->sei_size = nal[i].i_payload;
> > - x4->sei = av_malloc(x4->sei_size);
> > - if (!x4->sei)
> > - return AVERROR(ENOMEM);
> > - memcpy(x4->sei, nal[i].p_payload, nal[i].i_payload);
> > - continue;
> > - }
> > - memcpy(p, nal[i].p_payload, nal[i].i_payload);
> > - p += nal[i].i_payload;
> > - }
> > - avctx->extradata_size = p - avctx->extradata;
> > + ret = set_extradata(avctx);
> > + if (ret < 0)
> > + return ret;
> > }
> >
> > cpb_props = ff_encode_add_cpb_side_data(avctx);
>
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
