could you also try adding one more parameter and try again? * -header_spacing 30*it should have the same value as -g in commandline. For example: *ffmpeg -i input.mkv -c:v h264_amf -g 30 -header_spacing 30 output.mp4*
ср, 19 апр. 2023 г. в 07:15, 罗勇刚(Yonggang Luo) <luoyongg...@gmail.com>: > thanks， I have already tried the top size 1 and 10 before on the enconder, > I assume you are talking about the encoder, as the decoder can not config > the gop size, I think it's should be a bug of and encoder or decoder, > because if I start the decoder before amf encoder, it's working fine， it is > either because the encoder only encode the first I frame properly or the > decoder can not recognize the I frame generated by amf encoder. > > Dmitrii Ovchinnikov <ovchinnikov.dmit...@gmail.com> 于 2023年4月19日周三 > 01:55写道： > > > For libx264 the default gop size is 10, while for amf the default gop > size > > is 250. I suspect this is the reason. > > Try adding the following parameter “* -g 10* ” when using amf encoder. > > This parameter will set gop size to 10. > > > > вт, 11 апр. 2023 г. в 09:42, 罗勇刚(Yonggang Luo) <luoyongg...@gmail.com>: > > > > > When using libx264: > > > The pull result is: > > > ``` > > > C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay > > -max_delay > > > 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags > > > +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp > > > ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the > > > FFmpeg developers > > > built with gcc 12.2.0 (Rev10, Built by MSYS2 project) > > > configuration: --enable-gpl --enable-version3 --enable-shared > > > --disable-w32threads --disable-autodetect --enable-fontconfig > > > --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp > > --enable-bzlib > > > --enable-lzma --enable-libsnappy --enable-zlib --enable-librist > > > --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth > > > --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 > > > --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi > > > --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 > > > --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom > > > --enable-libjxl --enable-libopenjpeg --enable-libvpx > > > --enable-mediafoundation --enable-libass --enable-frei0r > > > --enable-libfreetype --enable-libfribidi --enable-liblensfun > > > --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf > > > --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec > > > --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl > > > --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl > > > --enable-libcdio --enable-libgme --enable-libmodplug > --enable-libopenmpt > > > --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine > > > --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc > > > --enable-libilbc --enable-libgsm --enable-libopencore-amrnb > > > --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa > > > --enable-libbs2b --enable-libflite --enable-libmysofa > > > --enable-librubberband --enable-libsoxr --enable-chromaprint > > > libavutil 58. 2.100 / 58. 2.100 > > > libavcodec 60. 3.100 / 60. 3.100 > > > libavformat 60. 3.100 / 60. 3.100 > > > libavdevice 60. 1.100 / 60. 1.100 > > > libavfilter 9. 3.100 / 9. 3.100 > > > libswscale 7. 1.100 / 7. 1.100 > > > libswresample 4. 10.100 / 4. 10.100 > > > libpostproc 57. 1.100 / 57. 1.100 > > > Input #0, sdp, from 'rtp_h264_30003.sdp':= 0KB sq= 0B f=0/0 > > > Duration: N/A, start: -0.017911, bitrate: N/A > > > Stream #0:0: Video: h264 (High), yuv420p(progressive), 1920x1060, 50 > > fps, > > > 50 tbr, 90k tbn > > > 3.79 M-V: 3.731 fd= 0 aq= 0KB vq= 0KB sq= 0B f=0/0 > > > ``` > > > > > > But when using h264_amf: > > > ``` > > > > > > C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay > > -max_delay > > > 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags > > > +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp > > > ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the > > > FFmpeg developers > > > built with gcc 12.2.0 (Rev10, Built by MSYS2 project) > > > configuration: --enable-gpl --enable-version3 --enable-shared > > > --disable-w32threads --disable-autodetect --enable-fontconfig > > > --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp > > --enable-bzlib > > > --enable-lzma --enable-libsnappy --enable-zlib --enable-librist > > > --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth > > > --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 > > > --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi > > > --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 > > > --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom > > > --enable-libjxl --enable-libopenjpeg --enable-libvpx > > > --enable-mediafoundation --enable-libass --enable-frei0r > > > --enable-libfreetype --enable-libfribidi --enable-liblensfun > > > --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf > > > --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec > > > --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl > > > --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl > > > --enable-libcdio --enable-libgme --enable-libmodplug > --enable-libopenmpt > > > --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine > > > --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc > > > --enable-libilbc --enable-libgsm --enable-libopencore-amrnb > > > --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa > > > --enable-libbs2b --enable-libflite --enable-libmysofa > > > --enable-librubberband --enable-libsoxr --enable-chromaprint > > > libavutil 58. 2.100 / 58. 2.100 > > > libavcodec 60. 3.100 / 60. 3.100 > > > libavformat 60. 3.100 / 60. 3.100 > > > libavdevice 60. 1.100 / 60. 1.100 > > > libavfilter 9. 3.100 / 9. 3.100 > > > libswscale 7. 1.100 / 7. 1.100 > > > libswresample 4. 10.100 / 4. 10.100 > > > libpostproc 57. 1.100 / 57. 1.100 > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header errorq= 0B f=0/0 > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header errorq= 0B f=0/0 > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0 > > > Last message repeated 1 times > > > [h264 @ 000001ba7836b100] decode_slice_header error > > > [h264 @ 000001ba7836b100] no frame! > > > ``` > > > > > > And if I start the ffplay pull script before the rstp push executable, > > > then it can decoding the stream properly. > > > ``` > > > > > > C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay > > -max_delay > > > 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags > > > +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp > > > ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the > > > FFmpeg developers > > > built with gcc 12.2.0 (Rev10, Built by MSYS2 project) > > > configuration: --enable-gpl --enable-version3 --enable-shared > > > --disable-w32threads --disable-autodetect --enable-fontconfig > > > --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp > > --enable-bzlib > > > --enable-lzma --enable-libsnappy --enable-zlib --enable-librist > > > --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth > > > --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 > > > --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi > > > --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 > > > --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom > > > --enable-libjxl --enable-libopenjpeg --enable-libvpx > > > --enable-mediafoundation --enable-libass --enable-frei0r > > > --enable-libfreetype --enable-libfribidi --enable-liblensfun > > > --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf > > > --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec > > > --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl > > > --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl > > > --enable-libcdio --enable-libgme --enable-libmodplug > --enable-libopenmpt > > > --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine > > > --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc > > > --enable-libilbc --enable-libgsm --enable-libopencore-amrnb > > > --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa > > > --enable-libbs2b --enable-libflite --enable-libmysofa > > > --enable-librubberband --enable-libsoxr --enable-chromaprint > > > libavutil 58. 2.100 / 58. 2.100 > > > libavcodec 60. 3.100 / 60. 3.100 > > > libavformat 60. 3.100 / 60. 3.100 > > > libavdevice 60. 1.100 / 60. 1.100 > > > libavfilter 9. 3.100 / 9. 3.100 > > > libswscale 7. 1.100 / 7. 1.100 > > > libswresample 4. 10.100 / 4. 10.100 > > > libpostproc 57. 1.100 / 57. 1.100 > > > Input #0, sdp, from 'rtp_h264_30003.sdp':= 0KB sq= 0B f=0/0 > > > Duration: N/A, start: -0.053911, bitrate: N/A > > > Stream #0:0: Video: h264 (Main), yuv420p(tv, bt709/reserved/reserved, > > > progressive), 1920x1060 [SAR 1:1 DAR 96:53], 50 fps, 50 tbr, 90k tbn > > > ``` > > > > > > Is that a bug of h264_amf or the config option for h264_amf is > invalid? > > > > > > > > > > > > -- > > > 此致 > > > 礼 > > > 罗勇刚 > > > Yours > > > sincerely, > > > Yonggang Luo > > > _______________________________________________ > > > ffmpeg-devel mailing list > > > ffmpeg-devel@ffmpeg.org > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > To unsubscribe, visit link above, or email > > > ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe". > > > > > > > > > -- > > Sincerely, Ovchinnikov D.A. > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > To unsubscribe, visit link above, or email > > ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe". > > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe". > -- Sincerely, Ovchinnikov D.A. _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
