On Thu, 2022-05-26 at 08:08 +0000, softworkz wrote:
> From: softworkz <softwo...@hotmail.com>
>
> Signed-off-by: softworkz <softwo...@hotmail.com>
> ---
> libavcodec/qsvdec.c | 233 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 233 insertions(+)
>
> diff --git a/libavcodec/qsvdec.c b/libavcodec/qsvdec.c
> index 5fc5bed4c8..7d6a491aa0 100644
> --- a/libavcodec/qsvdec.c
> +++ b/libavcodec/qsvdec.c
> @@ -49,6 +49,12 @@
> #include "hwconfig.h"
> #include "qsv.h"
> #include "qsv_internal.h"
> +#include "h264dec.h"
> +#include "h264_sei.h"
> +#include "hevcdec.h"
> +#include "hevc_ps.h"
> +#include "hevc_sei.h"
> +#include "mpeg12.h"
>
> static const AVRational mfx_tb = { 1, 90000 };
>
> @@ -60,6 +66,8 @@ static const AVRational mfx_tb = { 1, 90000 };
> AV_NOPTS_VALUE : pts_tb.num ? \
> av_rescale_q(mfx_pts, mfx_tb, pts_tb) : mfx_pts)
>
> +#define PAYLOAD_BUFFER_SIZE 65535
> +
> typedef struct QSVAsyncFrame {
> mfxSyncPoint *sync;
> QSVFrame *frame;
> @@ -101,6 +109,9 @@ typedef struct QSVContext {
>
> mfxExtBuffer **ext_buffers;
> int nb_ext_buffers;
> +
> + mfxU8 payload_buffer[PAYLOAD_BUFFER_SIZE];
> + Mpeg1Context mpeg_ctx;
I wonder why only mpeg1 context is required in QSVContext.
> } QSVContext;
>
> static const AVCodecHWConfigInternal *const qsv_hw_configs[] = {
> @@ -599,6 +610,208 @@ static int qsv_export_film_grain(AVCodecContext *avctx,
> mfxExtAV1FilmGrainParam
> return 0;
> }
> #endif
> +static int find_start_offset(mfxU8 data[4])
> +{
> + if (data[0] == 0 && data[1] == 0 && data[2] == 1)
> + return 3;
> +
> + if (data[0] == 0 && data[1] == 0 && data[2] == 0 && data[3] == 1)
> + return 4;
> +
> + return 0;
> +}
> +
> +static int parse_sei_h264(AVCodecContext* avctx, QSVContext* q, AVFrame* out)
> +{
> + H264SEIContext sei = { 0 };
> + GetBitContext gb = { 0 };
> + mfxPayload payload = { 0, .Data = &q->payload_buffer[0], .BufSize =
> sizeof(q->payload_buffer) };
> + mfxU64 ts;
> + int ret;
> +
> + while (1) {
> + int start;
> + memset(payload.Data, 0, payload.BufSize);
> +
> + ret = MFXVideoDECODE_GetPayload(q->session, &ts, &payload);
> + if (ret != MFX_ERR_NONE) {
> + av_log(avctx, AV_LOG_WARNING, "error getting SEI payload: %d \n",
> ret);
Better to use AV_LOG_ERROR to match the description.
> + return ret;
> + }
> +
> + if (payload.NumBit == 0 || payload.NumBit >= payload.BufSize * 8) {
> + break;
> + }
> +
> + start = find_start_offset(payload.Data);
> +
> + switch (payload.Type) {
> + case SEI_TYPE_BUFFERING_PERIOD:
> + case SEI_TYPE_PIC_TIMING:
> + continue;
> + }
> +
> + if (init_get_bits(&gb, &payload.Data[start], payload.NumBit - start *
> 8) < 0)
> + av_log(avctx, AV_LOG_ERROR, "Error initializing bitstream
> reader");
> + else
I think it should return an error when failed to initialize GetBitContext, and
the `else` statement is not needed.
> + ret = ff_h264_sei_decode(&sei, &gb, NULL, avctx);
> +
> + if (ret < 0)
> + av_log(avctx, AV_LOG_WARNING, "Error parsing SEI type:
> %d Numbits %d error: %d\n", payload.Type, payload.NumBit, ret);
Better to use AV_LOG_ERROR and return an error. Otherwise please use 'warning'
instead of 'error' in the description.
> + else
> + av_log(avctx, AV_LOG_DEBUG, "mfxPayload Type: %d Numbits %d\n",
> payload.Type, payload.NumBit);
> + }
> +
> + if (out)
> + return ff_h264_export_frame_props(avctx, &sei, NULL, out);
> +
> + return 0;
> +}
> +
> +static int parse_sei_hevc(AVCodecContext* avctx, QSVContext* q, QSVFrame*
> out)
> +{
> + HEVCSEI sei = { 0 };
> + HEVCParamSets ps = { 0 };
> + GetBitContext gb = { 0 };
> + mfxPayload payload = { 0, .Data = &q->payload_buffer[0], .BufSize =
> sizeof(q->payload_buffer) };
> + mfxFrameSurface1 *surface = &out->surface;
> + mfxU64 ts;
> + int ret, has_logged = 0;
> +
> + while (1) {
> + int start;
> + memset(payload.Data, 0, payload.BufSize);
> +
> + ret = MFXVideoDECODE_GetPayload(q->session, &ts, &payload);
> + if (ret != MFX_ERR_NONE) {
> + av_log(avctx, AV_LOG_WARNING, "error getting SEI payload: %d \n",
> ret);
> + return 0;
It returns an error in parse_sei_h264() when MFXVideoDECODE_GetPayload fails to
get the payload. Please make the behavior consistent across the codecs.
(I'm fine to return 0 instead of an error to ignore errors in SEI decoding. )
> + }
> +
> + if (payload.NumBit == 0 || payload.NumBit >= payload.BufSize * 8) {
> + break;
> + }
> +
> + if (!has_logged) {
> + has_logged = 1;
> + av_log(avctx, AV_LOG_VERBOSE, "--------------------------------
> ---------\n");
> + av_log(avctx, AV_LOG_VERBOSE, "Start reading SEI - payload
> timestamp: %llu - surface timestamp: %llu\n", ts, surface->Data.TimeStamp);
> + }
> +
> + if (ts != surface->Data.TimeStamp) {
> + av_log(avctx, AV_LOG_WARNING, "GetPayload timestamp (%llu) does
> not match surface timestamp: (%llu)\n", ts, surface->Data.TimeStamp);
> + }
> +
> + start = find_start_offset(payload.Data);
> +
> + av_log(avctx, AV_LOG_VERBOSE, "parsing SEI type: %3d Numbits
> %3d Start: %d\n", payload.Type, payload.NumBit, start);
> +
> + switch (payload.Type) {
> + case SEI_TYPE_BUFFERING_PERIOD:
> + case SEI_TYPE_PIC_TIMING:
> + continue;
> + case SEI_TYPE_MASTERING_DISPLAY_COLOUR_VOLUME:
> + // There seems to be a bug in MSDK
> + payload.NumBit -= 8;
> +
> + break;
> + case SEI_TYPE_CONTENT_LIGHT_LEVEL_INFO:
> + // There seems to be a bug in MSDK
> + payload.NumBit = 48;
> +
> + break;
> + case SEI_TYPE_USER_DATA_REGISTERED_ITU_T_T35:
> + // There seems to be a bug in MSDK
> + if (payload.NumBit == 552)
> + payload.NumBit = 528;
> + break;
> + }
> +
> + if (init_get_bits(&gb, &payload.Data[start], payload.NumBit - start *
> 8) < 0)
> + av_log(avctx, AV_LOG_ERROR, "Error initializing bitstream
> reader");
> + else
I think it should return an error when failed to initialize GetBitContext and
the `else` statement is not needed.
> + ret = ff_hevc_decode_nal_sei(&gb, avctx, &sei, &ps,
> HEVC_NAL_SEI_PREFIX);
> +
> + if (ret < 0)
> + av_log(avctx, AV_LOG_WARNING, "error parsing SEI type:
> %d Numbits %d error: %d\n", payload.Type, payload.NumBit, ret);
> + else
> + av_log(avctx, AV_LOG_DEBUG, "mfxPayload Type: %d Numbits %d\n",
> payload.Type, payload.NumBit);
> + }
> +
> + if (has_logged) {
> + av_log(avctx, AV_LOG_VERBOSE, "End reading SEI\n");
> + }
> +
> + if (out && out->frame)
> + return ff_set_side_data(avctx, &sei, NULL, out->frame);
> +
> + return 0;
> +}
> +
> +static int parse_sei_mpeg12(AVCodecContext* avctx, QSVContext* q, AVFrame*
> out)
> +{
> + Mpeg1Context *mpeg_ctx = &q->mpeg_ctx;
> + mfxPayload payload = { 0, .Data = &q->payload_buffer[0], .BufSize =
> sizeof(q->payload_buffer) };
> + mfxU64 ts;
> + int ret;
> +
> + while (1) {
> + int start;
> +
> + memset(payload.Data, 0, payload.BufSize);
> + ret = MFXVideoDECODE_GetPayload(q->session, &ts, &payload);
> + if (ret != MFX_ERR_NONE) {
> + av_log(avctx, AV_LOG_WARNING, "error getting SEI payload: %d \n",
> ret);
WARNING or ERROR ?
> + return ret;
> + }
> +
> + if (payload.NumBit == 0 || payload.NumBit >= payload.BufSize * 8) {
> + break;
> + }
> +
> + start = find_start_offset(payload.Data);
> +
> + start++;
> +
> + ff_mpeg_decode_user_data(avctx, mpeg_ctx, &payload.Data[start],
> (int)((payload.NumBit + 7) / 8) - start);
> +
> + if (ret < 0)
Here ret is always MFX_ERR_NONE
> + av_log(avctx, AV_LOG_WARNING, "error parsing SEI type:
> %d Numbits %d error: %d\n", payload.Type, payload.NumBit, ret);
> + else
> + av_log(avctx, AV_LOG_DEBUG, "mfxPayload Type: %d Numbits %d
> start %d -> %.s\n", payload.Type, payload.NumBit, start, (char
> *)(&payload.Data[start]));
> + }
> +
> + if (!out)
> + return 0;
> +
> + if (mpeg_ctx->a53_buf_ref) {
> +
> + AVFrameSideData *sd = av_frame_new_side_data_from_buf(out,
> AV_FRAME_DATA_A53_CC, mpeg_ctx->a53_buf_ref);
> + if (!sd)
> + av_buffer_unref(&mpeg_ctx->a53_buf_ref);
> + mpeg_ctx->a53_buf_ref = NULL;
> + }
> +
> + if (mpeg_ctx->has_stereo3d) {
> + AVStereo3D *stereo = av_stereo3d_create_side_data(out);
> + if (!stereo)
> + return AVERROR(ENOMEM);
> +
> + *stereo = mpeg_ctx->stereo3d;
> + mpeg_ctx->has_stereo3d = 0;
> + }
> +
> + if (mpeg_ctx->has_afd) {
> + AVFrameSideData *sd = av_frame_new_side_data(out, AV_FRAME_DATA_AFD,
> 1);
> + if (!sd)
> + return AVERROR(ENOMEM);
> +
> + *sd->data = mpeg_ctx->afd;
> + mpeg_ctx->has_afd = 0;
> + }
> +
> + return 0;
> +}
>
> static int qsv_decode(AVCodecContext *avctx, QSVContext *q,
> AVFrame *frame, int *got_frame,
> @@ -636,6 +849,8 @@ static int qsv_decode(AVCodecContext *avctx, QSVContext
> *q,
> insurf, &outsurf, sync);
> if (ret == MFX_WRN_DEVICE_BUSY)
> av_usleep(500);
> + else if (avctx->codec_id == AV_CODEC_ID_MPEG1VIDEO ||
> avctx->codec_id
> == AV_CODEC_ID_MPEG2VIDEO)
We didn't add qsv decoder for AV_CODEC_ID_MPEG1VIDEO in qsvdec.c
> + parse_sei_mpeg12(avctx, q, NULL);
>
> } while (ret == MFX_WRN_DEVICE_BUSY || ret == MFX_ERR_MORE_SURFACE);
>
> @@ -677,6 +892,24 @@ static int qsv_decode(AVCodecContext *avctx, QSVContext
> *q,
> return AVERROR_BUG;
> }
>
> + switch (avctx->codec_id) {
> + case AV_CODEC_ID_MPEG1VIDEO:
> + case AV_CODEC_ID_MPEG2VIDEO:
No support for AV_CODEC_ID_MPEG1VIDEO.
Thanks
Haihao
> + ret = parse_sei_mpeg12(avctx, q, out_frame->frame);
> + break;
> + case AV_CODEC_ID_H264:
> + ret = parse_sei_h264(avctx, q, out_frame->frame);
> + break;
> + case AV_CODEC_ID_HEVC:
> + ret = parse_sei_hevc(avctx, q, out_frame);
> + break;
> + default:
> + ret = 0;
> + }
> +
> + if (ret < 0)
> + av_log(avctx, AV_LOG_ERROR, "Error parsing SEI data\n");
> +
> out_frame->queued += 1;
>
> aframe = (QSVAsyncFrame){ sync, out_frame };
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
