sharpbai:
> Before macOS 11, the encoded h264 sample contains fixed SEI before
> IDR frame, which the content is below
>
> 06 05 10 b9 ed b9 30 5d 21 4b 71 83 71 2c 10 a3
> 14 bb 29 80
>
> The length of the encoded SEI nalu is 20 byte. According to
> the ITU-T H.264 Recommendation section 7.3.2.3.1, the last byte
> 0x80 means type. Then there is no length byte, which make the
> SEI nonstandard.
>
Wrong:
06: forbidden_zero_bit + nal_ref_idc + nal_unit_type (6 for SEI)
05: payload type 5 (user data unregistered) SEI message
10: length of this SEI message is 16
b9-29: the payload of this SEI message (the first 12 byte are an uuid,
the last are user_data_payload_byte)
80: rbsp_trailing_bits: the first bit is rbsp_stop_one_bit (equal to
one), the remaining bits are padding (with value zero)
You can use trace_headers to inspect this.
(Notice that one needs to know the length of the NAL unit in advance
before one can start parsing it; how one gets it depends upon the
framing. There are two common methods for this: Annex B and mp4. The
former works by using start codes 0x00 00 01 to mark the beginning of a
new NAL, the latter prefixes the length of the NAL units to the units.)
> On macOS 11, the encoded h264 sample still contains fixed SEI before
> IDR frame, which length is 5 bytes longer than before.
>
> 06 05 10 b9 ed b9 30 5d 21 4b 71 83 71 2c 10 a3
> 14 bb 29 80 00 00 03 00 01
> ^^ ^^ ^^ ^^ ^^
That looks as if there were a 00 00 00 01 startcode after the SEI that
some tool has tried to 0x03 escape. That is a bug. Can you share samples
containing these NAL units?
>
> This time type the content of the SEI has type 0 payload but
> invalid length payload data, which violates recommendation
> appendix D.
>
> Whether it is a bug or not, these SEI nalus should be erased to keep
> the output bytestream not violating the standard. But we may
> not come across the situration we do need these encoded SEI
> nalu, so we just reserve a switch and set not to output by default.
>
> Signed-off-by: sharpbai <sharp...@gmail.com>
> ---
> libavcodec/videotoolboxenc.c | 51 +++++++++++++++++++++---------------
> 1 file changed, 30 insertions(+), 21 deletions(-)
>
> diff --git a/libavcodec/videotoolboxenc.c b/libavcodec/videotoolboxenc.c
> index cc08cf6a50..c240090f10 100644
> --- a/libavcodec/videotoolboxenc.c
> +++ b/libavcodec/videotoolboxenc.c
> @@ -221,6 +221,7 @@ typedef struct VTEncContext {
>
> int64_t allow_sw;
> int64_t require_sw;
> + int64_t ignore_internal_sei;
>
> bool flushing;
> bool has_b_frames;
> @@ -1690,7 +1691,8 @@ static int copy_replace_length_codes(
> CMSampleBufferRef sample_buffer,
> ExtraSEI *sei,
> uint8_t *dst_data,
> - size_t dst_size)
> + size_t dst_size,
> + int ignore_internal_sei)
> {
> size_t src_size = CMSampleBufferGetTotalSampleSize(sample_buffer);
> size_t remaining_src_size = src_size;
> @@ -1707,8 +1709,8 @@ static int copy_replace_length_codes(
> }
>
> while (remaining_src_size > 0) {
> - size_t curr_src_len;
> - size_t curr_dst_len;
> + size_t curr_src_len = 0;
> + size_t curr_dst_len = 0;
> size_t box_len = 0;
> size_t i;
>
> @@ -1740,7 +1742,8 @@ static int copy_replace_length_codes(
> box_len |= size_buf[i];
> }
>
> - if (sei && !wrote_sei && is_post_sei_nal_type(nal_type)) {
> + if (sei && !wrote_sei &&
> + (ignore_internal_sei || is_post_sei_nal_type(nal_type))) {
> //No SEI NAL unit - insert.
> int wrote_bytes;
>
> @@ -1775,27 +1778,30 @@ static int copy_replace_length_codes(
> }
>
> curr_src_len = box_len + length_code_size;
> - curr_dst_len = box_len + sizeof(start_code);
>
> - if (remaining_src_size < curr_src_len) {
> - return AVERROR_BUFFER_TOO_SMALL;
> - }
> + if (!(ignore_internal_sei && nal_type == H264_NAL_SEI)) {
> + curr_dst_len = box_len + sizeof(start_code);
>
> - if (remaining_dst_size < curr_dst_len) {
> - return AVERROR_BUFFER_TOO_SMALL;
> - }
> + if (remaining_src_size < curr_src_len) {
> + return AVERROR_BUFFER_TOO_SMALL;
> + }
> +
> + if (remaining_dst_size < curr_dst_len) {
> + return AVERROR_BUFFER_TOO_SMALL;
> + }
>
> - dst_box = dst_data + sizeof(start_code);
> + dst_box = dst_data + sizeof(start_code);
>
> - memcpy(dst_data, start_code, sizeof(start_code));
> - status = CMBlockBufferCopyDataBytes(block,
> - src_offset + length_code_size,
> - box_len,
> - dst_box);
> + memcpy(dst_data, start_code, sizeof(start_code));
> + status = CMBlockBufferCopyDataBytes(block,
> + src_offset +
> length_code_size,
> + box_len,
> + dst_box);
>
> - if (status) {
> - av_log(avctx, AV_LOG_ERROR, "Cannot copy data: %d\n", status);
> - return AVERROR_EXTERNAL;
> + if (status) {
> + av_log(avctx, AV_LOG_ERROR, "Cannot copy data: %d\n",
> status);
> + return AVERROR_EXTERNAL;
> + }
> }
>
> if (sei && !wrote_sei && nal_type == H264_NAL_SEI) {
> @@ -1931,7 +1937,8 @@ static int vtenc_cm_to_avpacket(
> sample_buffer,
> sei,
> pkt->data + header_size,
> - pkt->size - header_size
> + pkt->size - header_size,
> + vtctx->ignore_internal_sei
> );
>
> if (status) {
> @@ -2543,6 +2550,8 @@ static const enum AVPixelFormat hevc_pix_fmts[] = {
> { .i64 = 0 }, 0, 1, VE }, \
> { "require_sw", "Require software encoding", OFFSET(require_sw),
> AV_OPT_TYPE_BOOL, \
> { .i64 = 0 }, 0, 1, VE }, \
> + { "ignore_internal_sei", "Ignore SEI nalu generated by videotoolbox",
> OFFSET(ignore_internal_sei), AV_OPT_TYPE_BOOL, \
> + { .i64 = 1 }, 0, 1, VE }, \
> { "realtime", "Hint that encoding should happen in real-time if not
> faster (e.g. capturing from camera).", \
> OFFSET(realtime), AV_OPT_TYPE_BOOL, { .i64 = 0 }, 0, 1, VE }, \
> { "frames_before", "Other frames will come before the frames in this
> session. This helps smooth concatenation issues.", \
>
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
