50/60 fps timecode is using the field bit (which is the same as the phase
correction bit) to signal the least significant bit of a 50/60 fps timecode.
See SMPTE ST 12-1:2014 section 12.1.
Let's add support for this by using the recently added av_timecode_get_smpte
function which handles this properly.
This change affects DV and MXF encoder, MXF has no fate for 50/60fps content,
DV does, therefore the changes. It also affects decklink indev.
MediaInfo (a recent version) confirms that half-frame timecode must be
inserted. (although MediaInfo does not seem to check the field flag).
MXFInspect confirms valid timecode insertion to the System Item of MXF files.
Signed-off-by: Marton Balint <c...@passwd.hu>
---
libavutil/timecode.c | 15 +--------------
libavutil/timecode.h | 7 +++----
tests/ref/vsynth/vsynth1-dv-hd | 2 +-
tests/ref/vsynth/vsynth2-dv-hd | 2 +-
tests/ref/vsynth/vsynth3-dv-hd | 2 +-
tests/ref/vsynth/vsynth_lena-dv-hd | 2 +-
6 files changed, 8 insertions(+), 22 deletions(-)
diff --git a/libavutil/timecode.c b/libavutil/timecode.c
index cca53d73c4..cb916970ef 100644
--- a/libavutil/timecode.c
+++ b/libavutil/timecode.c
@@ -65,20 +65,7 @@ uint32_t av_timecode_get_smpte_from_framenum(const
AVTimecode *tc, int framenum)
ss = framenum / fps % 60;
mm = framenum / (fps*60) % 60;
hh = framenum / (fps*3600) % 24;
- return 0 << 31 | // color frame flag (0: unsync mode, 1: sync mode)
- drop << 30 | // drop frame flag (0: non drop, 1: drop)
- (ff / 10) << 28 | // tens of frames
- (ff % 10) << 24 | // units of frames
- 0 << 23 | // PC (NTSC) or BGF0 (PAL)
- (ss / 10) << 20 | // tens of seconds
- (ss % 10) << 16 | // units of seconds
- 0 << 15 | // BGF0 (NTSC) or BGF2 (PAL)
- (mm / 10) << 12 | // tens of minutes
- (mm % 10) << 8 | // units of minutes
- 0 << 7 | // BGF2 (NTSC) or PC (PAL)
- 0 << 6 | // BGF1
- (hh / 10) << 4 | // tens of hours
- (hh % 10); // units of hours
+ return av_timecode_get_smpte(tc->rate, drop, hh, mm, ss, ff);
}
uint32_t av_timecode_get_smpte(AVRational rate, int drop, int hh, int mm, int
ss, int ff)
diff --git a/libavutil/timecode.h b/libavutil/timecode.h
index 5801330921..e54b116e93 100644
--- a/libavutil/timecode.h
+++ b/libavutil/timecode.h
@@ -66,11 +66,11 @@ int av_timecode_adjust_ntsc_framenum2(int framenum, int
fps);
* the format description as follows:
* bits 0-5: hours, in BCD(6bits)
* bits 6: BGF1
- * bits 7: BGF2 (NTSC) or PC (PAL)
+ * bits 7: BGF2 (NTSC) or FIELD (PAL)
* bits 8-14: minutes, in BCD(7bits)
* bits 15: BGF0 (NTSC) or BGF2 (PAL)
* bits 16-22: seconds, in BCD(7bits)
- * bits 23: PC (NTSC) or BGF0 (PAL)
+ * bits 23: FIELD (NTSC) or BGF0 (PAL)
* bits 24-29: frames, in BCD(6bits)
* bits 30: drop frame flag (0: non drop, 1: drop)
* bits 31: color frame flag (0: unsync mode, 1: sync mode)
@@ -78,8 +78,7 @@ int av_timecode_adjust_ntsc_framenum2(int framenum, int fps);
* @note Frame number adjustment is automatically done in case of drop
timecode,
* you do NOT have to call av_timecode_adjust_ntsc_framenum2().
* @note The frame number is relative to tc->start.
- * @note Color frame (CF), binary group flags (BGF) and biphase mark polarity
- * correction (PC) bits are set to zero.
+ * @note Color frame (CF) and binary group flags (BGF) bits are set to zero.
*/
uint32_t av_timecode_get_smpte_from_framenum(const AVTimecode *tc, int
framenum);
diff --git a/tests/ref/vsynth/vsynth1-dv-hd b/tests/ref/vsynth/vsynth1-dv-hd
index e22f28c704..a93ce50ec0 100644
--- a/tests/ref/vsynth/vsynth1-dv-hd
+++ b/tests/ref/vsynth/vsynth1-dv-hd
@@ -1,4 +1,4 @@
-77f146c73a24495495c649f1e0d26fee *tests/data/fate/vsynth1-dv-hd.dv
+ce9f887af2391edbfcb21675962db54c *tests/data/fate/vsynth1-dv-hd.dv
14400000 tests/data/fate/vsynth1-dv-hd.dv
34b78cf725346c7f819c9d6209b8299a *tests/data/fate/vsynth1-dv-hd.out.rawvideo
stddev: 4.30 PSNR: 35.45 MAXDIFF: 74 bytes: 7603200/ 7603200
diff --git a/tests/ref/vsynth/vsynth2-dv-hd b/tests/ref/vsynth/vsynth2-dv-hd
index 5c4ed86fe7..9552c31948 100644
--- a/tests/ref/vsynth/vsynth2-dv-hd
+++ b/tests/ref/vsynth/vsynth2-dv-hd
@@ -1,4 +1,4 @@
-168f80951daf5eeefacac33fd06db87d *tests/data/fate/vsynth2-dv-hd.dv
+c152c7c3f9ef8f404b4bb7a388b947be *tests/data/fate/vsynth2-dv-hd.dv
14400000 tests/data/fate/vsynth2-dv-hd.dv
15dbe911532aca81c67bdd2846419027 *tests/data/fate/vsynth2-dv-hd.out.rawvideo
stddev: 1.75 PSNR: 43.26 MAXDIFF: 34 bytes: 7603200/ 7603200
diff --git a/tests/ref/vsynth/vsynth3-dv-hd b/tests/ref/vsynth/vsynth3-dv-hd
index ed94d08155..d0420d6f07 100644
--- a/tests/ref/vsynth/vsynth3-dv-hd
+++ b/tests/ref/vsynth/vsynth3-dv-hd
@@ -1,4 +1,4 @@
-1211b843d8dde81c583023e15beff35a *tests/data/fate/vsynth3-dv-hd.dv
+973b0856d1d94793bd6e8951284e642d *tests/data/fate/vsynth3-dv-hd.dv
14400000 tests/data/fate/vsynth3-dv-hd.dv
a038ad7c3c09f776304ef7accdea9c74 *tests/data/fate/vsynth3-dv-hd.out.rawvideo
stddev: 0.00 PSNR:999.99 MAXDIFF: 0 bytes: 86700/ 86700
diff --git a/tests/ref/vsynth/vsynth_lena-dv-hd
b/tests/ref/vsynth/vsynth_lena-dv-hd
index 6764f03c35..8b87da40ba 100644
--- a/tests/ref/vsynth/vsynth_lena-dv-hd
+++ b/tests/ref/vsynth/vsynth_lena-dv-hd
@@ -1,4 +1,4 @@
-fa8df53531f9e58f90bc9a33e5c78ca8 *tests/data/fate/vsynth_lena-dv-hd.dv
+30652b3740a32fa8bcee3b06a66b1dd2 *tests/data/fate/vsynth_lena-dv-hd.dv
14400000 tests/data/fate/vsynth_lena-dv-hd.dv
4db4175c80ea1f16b7ec303611b8873a
*tests/data/fate/vsynth_lena-dv-hd.out.rawvideo
stddev: 1.49 PSNR: 44.66 MAXDIFF: 27 bytes: 7603200/ 7603200
--
2.26.2
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
