On Monday 02 December 2002 12:28 pm, you wrote: > I'm getting an SCB Parity error on DevQ(0:1:0) I would check the devices on the bus and make sure that the devices all agree to either use (or not use) parity. If you have a mix, one needing parity and another not needing parity, then that could be a source of problems. Other item could be that device one is programmed for parity but is failing internally. And the parity error is trying to tell you that the drive is going bad.
> > I am beginning to suspect the Controller Card. Although I've used Adaptec > for more than five years now. Maybe the controller has met it's match. > > Tom wrote: > > On Monday 02 December 2002 11:55 am, you wrote: > > > I have received Kernel Panics and Mangled Filesystems from using the > > > ext3 filesystem on Adaptec 2940 Controllers. > > > > Physically check the SCSI system out. You may have termination problems. > > Do you have a log of the panic messages? > > > > > I would like to know three things: > > > > > > 1. Is anyone else having Reliability issues with the Journaled > > > Filesystems? > > > > I use EXT3 on both my workstation machine as well as the file server and > > it is the most reliable FS that I have tested so far. > > > > > 2. Which Journaled Filesystems can I Reliably use on an Internet > > > Server? Are any of them Production ready yet? > > > > > > 3. What journalling FS are you using and can you recommend? > > > > > > ------------------------------------------------------------------------ > > Want to buy your Pack or Services from MandrakeSoft? > > Go to http://www.mandrakestore.com
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
