Hallo!
As I haven't received any answer about my problem installing MDK into a Compaq
Presario 905 I am wondering if you know any other mailing list or web site
where I could find help.
Thanks in advance.
Es Dissabte 21 Setembre 2002 22:30, en Joan Tur va escriure:
> Hallo!
>
> A friend's Compaq Presario 905 is having the following problem while trying
> to boot from CD (tested with 8.2, 9rc2 and 9rc3):
>
> ...
> ALI15X3: IDE controller on PCI bus 00 dev 80
> PCI: no IRQ known for interrupt pin A of device 00:10.0. Please try using
> pci=biosirq
> ...
>
> > Partition check:
> > hda: spurious 8259A interrupt: IRQ7
>
> ...
>
> I've tryed booting "linux pci=biosirq" with no luck. He hasn't got the
> option in bios to assingn irqs manually.
>
> Last: we've found that booting "linux ide=nodma" reaches the following step
> ("Enabling PCMCIA extension cards"). Then it shows the following:
>
> Bank 3: b40000000000083b at 0000000001fc0003b0
> Kernel panic: Unable to continue.
>
> As it's got 256Mb ram and the video card is 32Mb we've added "mem=224M" and
> "mem=223M" to boot parameters with no luck.
>
> HELP! He's going back to windowwwwwwwwwssssssssssssss...
>
> Thanks in advance ;)
--
Joan Tur. Eivissa-Spain
AOL quini2k, ICQ 11407395
www.ClubIbosim.org
Linux: usuari registrat 190.783
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
