cool! good to know your problem is solved ... and you
posted your solution which is good for everyone who
might encounter the same problem =)
cheers!
--- Alan Wilter Sousa da Silva <[EMAIL PROTECTED]>
wrote:
> Hi Dianne,
>
> Thank you very much for your attention. I got a
> solution: I used
> via82cxxx.c version 3.26 (from kernel source MDK
> 8.1), recompiled the
> kernel and voil�, it works, now 'hdparm -tT (and -i)
> /dev/hda' gives:
>
> Timing buffer-cache reads: 128 MB in 0.50
> seconds =256.00 MB/sec
> Timing buffered disk reads: 64 MB in 1.60 seconds
> = 40.00 MB/sec
>
> Model=MAXTOR 6L040J2, FwRev=A93.0500,
> SerialNo=362203122597
> Config={ HardSect NotMFM HdSw>15uSec Fixed
> DTR>10Mbs }
> RawCHS=16383/16/63, TrkSize=32256, SectSize=21298,
> ECCbytes=4
> BuffType=DualPortCache, BuffSize=1819kB,
> MaxMultSect=16, MultSect=off
> CurCHS=16383/16/63, CurSects=-66060037, LBA=yes,
> LBAsects=78177792
> IORDY=on/off, tPIO={min:120,w/IORDY:120},
> tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2
> udma3 udma4 *udma5 udma6
> AdvancedPM=no
> Drive Supports : ATA/ATAPI-5 T13 1321D revision 1 :
> ATA-1 ATA-2 ATA-3
> ATA-4 ATA-5
>
> Cheers,
>
__________________________________________________
Do You Yahoo!?
Yahoo! Movies - coverage of the 74th Academy Awards�
http://movies.yahoo.com/
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
