I've been running LM 7.2 for a while w/o problems and I've been using this
hdparm tuning string:
hdparm -c3 -m16 /dev/hda
After switching to the 2.2.19 kernel, I get this message:
error message:
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: Write Cache FAILED Flushing!
I presumed that this is bad so I switch back to the earlier kernel - does
anyone know a way of preventing this?
Here is more info on the drive
hdparm /dev/hda
/dev/hda:
multcount = 16 (on)
I/O support = 1 (32-bit)
unmaskirq = 0 (off)
using_dma = 0 (off)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 627/255/63, sectors = 10085040, start = 0
hdparm -i /dev/hda:
Model=WDC AC35100L, FwRev=09.09M08, SerialNo=WD-WT4130144444
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=10672/15/63, TrkSize=57600, SectSize=600, ECCbytes=22
BuffType=DualPortCache, BuffSize=256kB, MaxMultSect=16, MultSect=16
CurCHS=10672/15/63, CurSects=10085040, LBA=yes, LBAsects=10085040
IORDY=on/off, tPIO={min:160,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2
hdparm -I /dev/hda:
Model=DW CCA5301L0 , FwRev=900.M980,
SerialNo=DWW-4T31104444 4
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=10672/15/63, TrkSize=57600, SectSize=600, ECCbytes=22
BuffType=DualPortCache, BuffSize=256kB, MaxMultSect=16, MultSect=16
CurCHS=10672/15/63, CurSects=10085040, LBA=yes, LBAsects=10085040
IORDY=on/off, tPIO={min:160,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2
