Hi Folks,
For a followup from last month, I found on the Tesla discussion list to use a Grease Injector Needle 18 Guage W54213 from Advance Auto etc does the trick. You have to hold the pin straight out puncturing the rubber boot and compress the grease gun with your leg (to keep the needle from cocking and squirting grease out sideways in the zerk fitting). I shot 3 squirts into *all* 4 ball joints and *no* more squeaking in the upper right ball joint steering/bouncing suspension. Cheaper than paying the stealership +$260 and driving a day back and forth to Richmond Va (said I may have to stay overnight). Have a renewable energy day, Mark Mark E. Hanson 184 Vista Lane Fincastle, VA 24090 540-473-1248 phone & FAX, 540-816-0812 cell REEVA: community service RE & EV project club Website: www.REEVAdiy.org (See Project Gallery) UL Certified PV Installer My RE&EV Circuits: www.EVDL.org/lib/mh REEVA Demo: <http://youtu.be/4kqWn2H-rA0> http://youtu.be/4kqWn2H-rA0 <https://www.weatherlink.com/embeddablePage/show/a88920376f864ecabaed843dd89 75b8d/signature> Fincastle Solar Weather Station -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20240718/96792484/attachment.htm> _______________________________________________ Address messages to [email protected] No other addresses in TO and CC fields HELP: http://www.evdl.org/help/
