I can get a cable in to do cell taps, but running a bunch of
cross-module interconnects that can carry high current is unlikely.
I'd need to use something like 16ga interconnects for between
module/cells. Then would I need to cross-connect with big cables at
each module pair, as well as cable them in series?
On 10/9/2022 9:23 AM, (-Phil-) wrote:
If it's sealed with no cell taps, how can you build a proper BMS?
On Sat, Oct 8, 2022 at 8:09 PM John Lussmyer via EV
<ev@lists.evdl.org> wrote:
Can't do in this case. Each module is a sealed box of 12s.
On 10/8/2022 5:55 PM, (-Phil-) wrote:
> The best way to do a parallel setup is cell buddy-pairs if
possible.
> There is no problem doing it this way. Could also "cheat" with 2
> separate strings by tying the cell taps together as stiffly as
practical.
>
_______________________________________________
Address messages to ev@lists.evdl.org
No other addresses in TO and CC fields
HELP: http://www.evdl.org/help/
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20221009/e27728f0/attachment.htm>
_______________________________________________
Address messages to ev@lists.evdl.org
No other addresses in TO and CC fields
HELP: http://www.evdl.org/help/
