What jumper? Each side of a DPDT switch is independent. So, one side of the switch will be ON-OFF-ON for the low beam. The other side will be OFF-OFF-ON for the hi beam.
On Sat May 11 11:10:59 PDT 2019 [email protected] said: >On 2019-05-11 12:44, John Lussmyer via EV wrote: >> No. >> If you have a DPDT switch, Put +12v on both the center contacts. >> On one end, attach JUST the low beam light to ONE contact. >> At the other end, Attach the low beam to ONE contact, and the HiBeam >> to the other contact. > >isn't that jumper going to make them both go on ?.. >I have 2 lights . > >> >> On Sat May 11 10:30:54 PDT 2019 [email protected] said: >>> on my electric motorcycle I want to use my DPDT 3 postion switch to >>> have like a hi /lo beam, but both lights on "hi beam " and one on >>> "low >>> beam"setting. >>> >>> sw postion 1 2 3 >>> 1 light / off/ 2nd light & 1st light both >>> >>> Can do i do this by jumpering across 1 & 3 on one side only?? >> >> >> -- >> >> Try my Sensible Email package! >> https://sourceforge.net/projects/sensibleemail/ >> _______________________________________________ >> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub >> http://lists.evdl.org/listinfo.cgi/ev-evdl.org >> Please discuss EV drag racing at NEDRA >> (http://groups.yahoo.com/group/NEDRA) -- Try my Sensible Email package! https://sourceforge.net/projects/sensibleemail/ _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
