I used an electric blanket under a water bed through an entire winter.
It worked fine while turned on the entire time.

   Under a bunch of batteries in a moving vehicle I would not trust.
Bob Keeland
On Jun 4, 2016 7:48 AM, "John Lindsay via EV" <ev@lists.evdl.org> wrote:

We use them under people in Australia. Not recommended to be left on when
you're in bed but folks do.

John Lindsay

> On 4 Jun 2016, at 9:32 PM, EVDL Administrator via EV <ev@lists.evdl.org>
wrote:
>
>> On 3 Jun 2016 at 22:39, Bill Dennis via EV wrote:
>>
>> I've see Lee Hart's description of using an electric blanket under a
battery
>> pack for heating.  Does anyone know if the controllers for these
blankets will
>> work with a modified sine wave inverter?  That is, if the blanket's
little
>> control unit that allows you do adjust the heat setting and has an
automatic
>> shut-off timer will work if powered by a modified sine wave inverter.
>
> Not that I mean to answer for Lee, but - maybe.
>
> One issue that should be OK - assuming that the thermostat is a
traditional
> mechanical type - is its ability to handle your inverter's output wave.
>
> "Modified sine wave" inverters should really be called "modified square
> wave" because they're closer to that.  But the wave still crosses zero
volts
> 120 times a second.  That's what you need for the thermostat to manage
> opening without welding its contacts, which is what would probably happen
if
> you tried to use it on DC.
>
> If the blanket has some kind of electronic controller, instead of a
> mechanical thermostat, then I don't know.
>
> I have some other concerns.  One problem I see is that an electric blanket
> thermostat responds to room air temperature.  It cycles on and off every
few
> minutes or so (coarse PWM), with more on-time as the room temperature
falls.
> Seems to me that it'd be tough to make it hold a consistent battery
> temperature, since it wouldn't be able to sense the actual battery
> temperature.
>
> Also, the thermostat isn't designed for automotive use, where it might be
> exposed to the elements and lots of vibration.
>
> Finally, I'd be concerned that an electric blanket isn't designed to have
> weight on it, it's meant to be placed OVER a person.
>
> David Roden - Akron, Ohio, USA
> EVDL Administrator
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> EVDL Information: http://www.evdl.org/help/
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Note: mail sent to "evpost" and "etpost" addresses will not
> reach me.  To send a private message, please obtain my
> email address from the webpage http://www.evdl.org/help/ .
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
>
>
> _______________________________________________
> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> Read EVAngel's EV News at http://evdl.org/evln/
> Please discuss EV drag racing at NEDRA (
http://groups.yahoo.com/group/NEDRA)
>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Read EVAngel's EV News at http://evdl.org/evln/
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20160604/327ab677/attachment.htm>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Read EVAngel's EV News at http://evdl.org/evln/
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)

Reply via email to