Hi Cor, I guess if you are soldering I can go that way. However I do have a variety of crimpers. I could go to harbor freight on my way down to get the security drivers. I'm free today, tomorrow and Friday. Working Saturday and Sunday night. These Dostar have two wires internal connected to a switch , 152 ohm resistor. Switch connected to the handle trigger. Connections: PP CH are the small ones. L, N and FH are the big ones. L might be load and N the other load...or Neutral FH must be ground. It's in the middle. I've only done one conversion. It was easy. A simple line for line connection. I simply bought a cord with the J1772 plug on it. Lawrence
Message: 2Date: Tue, 9 Feb 2016 21:31:05 -0800 From: Cor van de Water via EV <[email protected]> To: "Electric Vehicle Discussion List" <[email protected]> Subject: Re: [EVDL] I need the secrets of the J1772. Avcon to J1772 DIY Message-ID: <a73bc4b8b3218642a56a2c9eb01b44e0027d8...@exchange.corp.proxim.com> Content-Type: text/plain; charset="iso-8859-1" Hi Lawrence, Do you come to Silicon Valley often? I have done at least 5 conversions AVCON => pistol and I have always soldered the pins. Make sure you have a soldering iron that can deliver enough heat to work fast enough that the solder does not wick up into the wire too far. Also, I pre-tin the wire separately, then I heat up the pin and fill the pin's cavity about 2/3 full of molten solder, then I insert the pre-tinned wire so all solder flows together and then I let it cool, this avoids prolonged heating of the wire and the wicking problem. The J1772 standard drawing has it all layed out, the switch is supposed to already have a resistor attached and I also liked to reference the conversion pictorial that is shown on I believe Rush's site of a conversion. Then the proof of the pudding is in the eating - measure the voltages on the plug of your car and on the pistol before plugging in the first time. Everything is referenced to ground. In fact, I need to do one more conversion of the DS-100 that I have that I have no pistol for, I only have a cord with attached plug but I will keep that for other projects. So, I would need one more plug. Do you fancy a mini Maker Fair in my garage? Cor van de Water Chief Scientist Proxim Wireless office +1 408 383 7626 Skype: cor_van_de_water XoIP +31 87 784 1130 private: cvandewater.info http://www.proxim.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20160210/ebc607d5/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org Read EVAngel's EV News at http://evdl.org/evln/ Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
