Lawrence, How does the other side of the charging cable look, where it goes into the EVSE? If what I think is the entrance (I can only see the back side in the enclosure, not the front) looks like a NEMA 14-50 style plug, so does this cable have a plug at the EVSE side? I see a thin white wire go into this plug, besides the ground and two hot thick wires. It is hard to follow from the pics, but it looks like that thin white wire goes to a fuse holder and then comes from the module on the side panel between the service entrance and the breaker. This would indicate that there is a pilot generating circuit in that black module and the white wire is carrying it. You should check how the 5 wires in the cable are connected to what seems only 4 contacts in the plug on the EVSE, possible both thick and thin green are ground and connected to the same terminal. An ohm meter might help. Success.
Cor van de Water Chief Scientist Proxim Wireless office +1 408 383 7626 Skype: cor_van_de_water XoIP +31 87 784 1130 private: cvandewater.info http://www.proxim.com This email message (including any attachments) contains confidential and proprietary information of Proxim Wireless Corporation. If you received this message in error, please delete it and notify the sender. Any unauthorized use, disclosure, distribution, or copying of any part of this message is prohibited. -----Original Message----- From: EV [mailto:[email protected]] On Behalf Of Lawrence Rhodes via EV Sent: Wednesday, January 27, 2016 7:23 AM To: Electric Vehicle Discussion List Subject: Re: [EVDL] The secrets of Avcon or smashing the hell out of a glued together claw. This is the result. The problem. Figuring out if it has a pilot wire and module. Lawrence Rhodes From: Tom Keenan <[email protected]> To: Lawrence Rhodes <[email protected]>; Electric Vehicle Discussion List <[email protected]> Sent: Tuesday, January 26, 2016 6:03 PM Subject: Re: [EVDL] The secrets of Avcon or smashing the hell out of a glued together claw. Is this similar?http://www.tucsonev.com/EVIDS50.html Tom Keenan On Jan 26, 2016, at 5:09 PM, Lawrence Rhodes via EV <[email protected]> wrote: Avcon was very through in star screw binding and gluing together the CLAW. After application of mallet and screwdriver the insides were reveled. Comparing the contact surfaces on the front to the back wires. Bottom. Ground. Center left. Hot. Center Right. Hot. One from right. Probably pilot. Right. Maybe proximity if Avcon had that. Colors of wire. Green Ground. Black and Red. Hot. Blue is wired to the 14-50 plug as neutral. More evidence of pilot. Green(small) might proximity but is unknown. I couldn't find an Avcon pinout on the web. The small green wire seems to have some function on Avcon. If someone has the Avcon pinout that would be helpful. Lawrence Rhodes http://s546.photobucket.com/user/larry94110/media/20160126_155410_3.jpg.html scroll right or left to see all three photos. One of the contacts and two of the wires. Clearly showing 5 contacts. 5 wires. Green big. Red. Black. Blue and small green. _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org Read EVAngel's EV News at http://evdl.org/evln/ Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20160127/47fc230c/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org Read EVAngel's EV News at http://evdl.org/evln/ Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA) _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org Read EVAngel's EV News at http://evdl.org/evln/ Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
