In reference to your P.S., good idea. I'll give that a try and report back on the results.
Thanks; Dennis -----Original Message----- From: KevinF [mailto:[email protected]] Sent: Wednesday, June 11, 2014 2:18 PM To: Pestka, Dennis J Subject: Re: [EVDL] Vibration Howdy Dennis! On 06/11/2014 10:06 AM, Pestka, Dennis J wrote: > Thanks for the suggestion, but you may have missed a previous post. Ooops, indeed I did! I remembered that the tires had been balanced and later the driveline but I missed that the the problem had survived tire changing. Sorry about that! > Based on the information I've been receiving, I think it is one of two things. > - Problem in the rear end, with bearings or drive axles. > - Balancing needed of my motor/flywheel/pressure plate/clutch assembly. > > I will be trying to diagnose it over the next week. > Hopefully I can figure it out. It's a tough one from the sounds of things so just keep plugging away at it. Eventually you'll run out of things that spin and in the process end up with a very smooth setup. Not so bad! Good luck! P.S. Wait, clutch? Did I also miss the part where you described what happens when you depress the clutch on decelerating and then feed in brake? -- Kevin F. [email protected] _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
