Errata 5845: https://www.rfc-editor.org/errata/eid5845
Proposed Status: Verified
Revision:

Section 3.3.1 says:

   EAP method messages are carried within EAP-Payload TLVs defined in
   Section 4.2.10.  If more than one method is going to be executed in
   the tunnel, then upon method completion, the server MUST send an
   Intermediate-Result TLV indicating the result.

It should say:

   EAP method messages are carried within EAP-Payload TLVs defined in
   Section 4.2.10.  Upon method completion, the server MUST send an
   Intermediate-Result TLV indicating the result.

Notes:

Description of whether Intermediate-Result TLV is supposed to be used in
the case where only a single inner EAP authentication method is used.
Section 3.3.1 says "more than one method is going to be executed in the
tunnel, then upon method completion, the server MUST send an
Intermediate-Result TLV indicating the result", Section 3.3.3 says "The
Crypto-Binding TLV and Intermediate-Result TLV MUST be included to perform
cryptographic binding after each successful EAP method in a sequence of one
or more EAP methods", 4.2.13 says "It MUST be included with the
Intermediate-Result TLV to perform cryptographic binding after each
successful EAP method in a sequence of EAP methods", Annex C.3 shows an
example exchange with a single inner EAP authentication method with use of
Intermediate-Result TLV.

It looks like the majority of the places discussion this topic implies that
there is going to be an Intermediate-Result TLV after each inner EAP
authentication method and the text in 3.3.1 is the only clear case of
conflicting (or well, at least misleading if one were to claim it does not
explicitly say MUST NOT for the one inner EAP authentication method case).
As such, I'd conclude the Intermediate-Result TLV is indeed going to be
exchanged after each EAP authentication method and the proposed text change
to 3.3.1 covers that.
_______________________________________________
Emu mailing list
Emu@ietf.org
https://www.ietf.org/mailman/listinfo/emu

Reply via email to