All good responses, many thanks! Still lots of outside work going on in prep for winter. Nights are freezing +- a few degrees. Will be back for more help if and when I need it. ;-) Rather certain I’ll need it. :-(. Thanks to all who replied and even to those who considered replying.
Dave > On Oct 29, 2024, at 2:53 AM, andy pugh <[email protected]> wrote: > > On Tue, 29 Oct 2024 at 03:19, Dave Engvall <[email protected]> wrote: > >> I could use guidance on a nice relable install that will handle a 5i25 -> >> i7i76. > > Start with the standard install image from: > http://linuxcnc.org/docs/stable/html/getting-started/getting-linuxcnc.html > > Then you can use pncconf to set up the 5i25 / 7i76 (it will appear in > the "CNC" menu after the install above) > > It is probably useful to have some idea which pins are going to do > what before starting the config, the mesa 7i76 docs should be helpful > there: > http://www.mesanet.com/pdf/parallel/7i76man.pdf > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
