> > +100, I have plumbing running across the bed on the right edge of the > carriage, feeding all the stuff on the apron, and I've crushed it > against the tailstock base several times. One of the additional bits of > gingerbread I need to get done.
Done that to oil cans :) El dom, 4 dic 2022 a las 18:30, gene heskett (<[email protected]>) escribió: > On 12/4/22 15:43, John Dammeyer wrote: > >> From: andy pugh [mailto:[email protected]] > >> On Sun, 4 Dec 2022 at 00:32, John Dammeyer <[email protected]> > wrote: > >> > >>> > >>> The Z axis is more interesting. Before homing I imagine the tail stock > >>> has to be loosened and moved all the way to the right as far away from > the > >>> headstock to ensure finding a home switch. > >>> > >> > >> My lathe uses a position.txt file hack and single-turn absolute > resolvers > >> to avoid needing to home (generally) > >> But when it needs to home the home sensor is with the saddle all the > way to > >> the right. > >> If I was doing it again I would have put a "tailstock sensor" in the > saddle > >> as an extra limit switch. > >> > >> -- > >> atp > > > > That's a really good idea. One that isn't over ridden with search for > home. Just that extra bit of safety. > > > +100, I have plumbing running across the bed on the right edge of the > carriage, feeding all the stuff on the apron, and I've crushed it > against the tailstock base several times. One of the additional bits of > gingerbread I need to get done. > > Cheers, Gene Heskett. > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author, 1940) > If we desire respect for the law, we must first make the law respectable. > - Louis D. Brandeis > Genes Web page <http://geneslinuxbox.net:6309/> > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
