For some high production value machining video. Check out “Titans of CNC Machining” on YouTube. These are very high impact videos that “advertise” the capabilities. I think these utilize all the points Chris makes and then go well beyond.
Not suggesting you have to go to thier level but offering additional inspiration. On Tue, Nov 22, 2022 at 2:01 PM Chris Albertson <[email protected]> wrote: > The content looks good but if the goal is to advertise, then you need to > "up" the production values considerably. > This is more than good enough to show us, but "fair" video production > quality will put the company in the wrong light. > So in order is importance: > > 1) *BUY A TRIPOD.* This is an absolute "must". > 2) Your video has what we call "artifacts". It is VERY compressed, perhaps > you can change the setting. The compression artifacts are noticeable and do > not give the "clean high precision" "look" you need. If it means spending > $350 on a good used camera, do it. This work needs to be shot is a MINIMUM > of 1080p 60 FPS with the highest bit rate you can do. > 3) Possibly use some "EQ" on the audio. taking off some of the higher pitch > noise is unrealistic, but more pleasant to listen to. > > Yes, video is an entirely different skill set than machining. The > current video is very good to show other machinists what you can do, > but advertising is a whole different ball game and does not depend on > logic, You would think a potential customer would say "this guy is > obviously an expert CNC machinist, but only a fair videographer." No, they > don't think like that, they "experience" the video and remember the > experience. > > > > On Tue, Nov 22, 2022 at 10:30 AM andrew beck <[email protected]> > wrote: > > > Hey guys I made this video last night of my machine running on a part > > thought you might like it. > > > > Running linuxcnc and preloading tool for toolchange > > > > Plus 4th axis etc > > > > I'm hoping to start making a lot of these to both advertise for my > machine > > shop and to show how good Linux CNC is. > > > > And that you can run big machines on it. > > > > https://youtu.be/kzaxBU0EVr0 > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > -- > > Chris Albertson > Redondo Beach, California > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
