Greetings all; It would be handier than a bottled beer, if there was an m-code I could hack up to do a setp. Do we have such a critter? I want to zero a counter module from the mdi command line. Or from an nc file, either way would work.
My 50/1 3d printed harmonic drive finally puked last night after nearly 9 months of exersize, and I have a set of what should be longer lasting 40/1 guts to put in it. I use the counter to count home switch closures to drive a pair of comps, one set to freeze the fb value from the stepgen on the 3 to 4 transition, and another freezes the fb value on the 103-104 trasition, the 1st subtracted from the second and displayed on a halmeter. A /100 then becomes the SCALE value for that rotary axis in the .ini file. Thank you. Cheers, Gene Heskett. -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author, 1940) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
