Hi Tomaz, I've purchased some servo motors from the RTelligent brand. Pretty good ones but I only tested it so far. The manuals are clear and the drives and motors are really well built. As Todd recommended, it's better to purchase the entire set from one seller.
El jue, 16 dic 2021 a las 17:35, John Dammeyer (<[email protected]>) escribió: > Hi Tomaz, > I've moved from DC Servos with HP_UHU drivers to Bergerda 400W AC Servos > on X and Y, a 750W on the Knee and 1.8kW for the spindle. Couldn't be > happier with price and service. Especially service/support. > > The problem with Aliexpress is you are dealing with little resellers > (perhaps not so little of course) but paying Alibaba and FedEx shipping for > Bergerda I still found the cost overall less than Ebay or Aliexpress. And > there's the service. > > http://en.bergerda.com/product/607.html > > Be prepared for larger than normal motor shafts, 220VAC operation. The > contact is Donald Chen. > > John Dammeyer > > > -----Original Message----- > > From: Tomaz T. [mailto:[email protected]] > > Sent: December-16-21 11:28 AM > > To: emc-users > > Subject: [Emc-users] Chinese 400W AC servo + driver selection > > > > Anyone here has experience with cheap Chinese 400W AC servos (and > drivers) from aliexpress. Which combination to choose for on > > "non commercial" cnc router!? There are so many of them and not much > reviews to find ... > > > > > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
