trešd., 2021. g. 20. okt., plkst. 17:15 — lietotājs Gene Heskett (<[email protected]>) rakstīja: > > On Wednesday 20 October 2021 07:56:48 andy pugh wrote: > > > On Mon, 18 Oct 2021 at 17:18, Thomas J Powderly <[email protected]> > wrote: > > > you can get a special newer, but not newest glade-3 installed > > > > The glade-gtk2 binary on the LinuxCNC repository is Glade-3. It's the > > right one to use. > > > > I think you start it with the command "glade". But it might be glade-3 > > for extra confusion. > > > > What is the binary called in the /usr/bin directory? > > please Andy, the exact line to reach the correct version. All of my > wintel boxes have glade-3.22, from a debian buster repo but the pi has > that glade-3.22 > and a glade-3 which is 3.8.6. > > All of my linuxcnc repo's point at the buildbot only. > > And this morning I am getting a wagonload of 404's from linuxcnc.org > links. >
Approximately the same here - glade-gtk2 is 3.8.6 and then there is glade-3.22 Executing "glade" in terminal will start editor that shows 3.22 in the background and I cannot open any gladevcp panels from sample configs. But I found a solution! In "Applications" menu, under "Development" right under 'Geany" I have 2 separate entries with equal name "Glade" (but slightly different icons). One of them will open the previously mentioned editor, version 3.22, but the other one will open an editor that does open sample gladevcp panels and I have been able to play with them and I actually managed to create a panel. Almost like I intended, there is some learning to do :)) Now I have a question - can I insert multiple gladevcp tabs in Axis? I tried with my panel and with the manual-example.ui from sample config - I got some errors (I can retry the test to get more specific answer). Or can I create a gladevcp panel that contains several tabs? What I intend to do is put status LEDs for almost all inputs and outputs together with some explanatory label so that operator can easily check current status of the machine and also some buttons to quickly put the machine in desired state in case of some error (for example, put required spindle in work position and rise all the rest to idle position etc.). The operator will not be that advanced to open the front door of control cabinet right next to the monitor to check status LEDs on existing input and output relay blocks and then use documentation to find the meaning of particular wire in electric wiring plans, I have to simplify the process. Viesturs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
