I can't remember ever having an issue with any ssd I have used. My laptop which currently has a Samsung SSD 860 EVO M.2 1TB
Power_On_Hours = 11845 I think all of our linuxcnc installed are on ssd's also. sam On Fri, Jul 3, 2020 at 8:24 AM Thaddeus Waldner <[email protected]> wrote: > Be aware that M.2 is a socket spec that includes both SATA and NVMe type > devices. > > https://www.atpinc.com/blog/what-is-m.2-M-B-BM-key-socket-3 > > Added to that, Apple began using PCIe drives before the NVMe standard was > established, so there’s another socket to be confused about if you run Mac. > > > > > Fast forward to the year 2020... Today we don't use SSDs that are made > to > > look like HDD and are put inside of a box with a SATA interface. That > hack > > was a transitional technique for retrofitting SSD into older computers. > > The box is mostly filled with air and the SATA interface is dead-dog-slow > > compared to PCIe. A modern SSD comes on an M2 size card and plugs > directly > > into the PCIe bus and does not even try to pretend it is a SATA Hard > Drive. > > If you are buying new storage you want a PCIe interface M.2 forms factor > > SSD. > > https://en.wikipedia.org/wiki/M.2 > > > > > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
