On Wed, 18 Mar 2020 at 05:33, Chris Albertson <[email protected]> wrote:
> These were invented by the same people who make the "speakON" speaker > jacks. These are the industry standard for pro audio. Speakon make good connectors for steppers and servos too. The rating is 40A @ 250V AC,with 2, 4 or 8 poles, so can run huge steppers and all but very high voltage servos. (I actually contacted Neutrik to ask about this, they said that the connectors were capable and the rest was the responsibility of the system designer. I can forward the actual email if anyone is interested) Here is the power supply / driver box for my lathe. PowerCON mains input and 2 x SpeakON outputs to the X and Z servo motors. https://photos.app.goo.gl/qrU27NrTQ5A1V3TE7 -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
