On Sunday 07 April 2019 14:26:53 Gene Heskett wrote: > On Sunday 07 April 2019 14:14:27 andy pugh wrote: > > On Sun, 7 Apr 2019 at 18:56, Gene Heskett <[email protected]> wrote: > > > Unfortunately, or maybe because I told the edge detector to only > > > outout a 2000 ns pulse when machine.machine-enabled goes false, > > > > Halui runs in user-space, so you might have simply got unlucky. > > In other words, a longer pulse is more than likely required. > > > I would try setting the pin from the command-line first, if you are > > unsure of its operation. > > I'll do that, and get back to you.
Routed it back to use the edge's true output, but didn't restore the output net, tried the setp while it was enabled, got told I can only do that while disabled, disabled machine and tried the setp true again, worked. Lets see what happens when I restore the net. Nothing, not even an error in the terminal screen. Signal is getting to all 4 pins, but I notice from halscope that I can't make it longer than 2 milliseconds. Do I need a delay for the disabling to get thru the system and tell everything so its delayed enough to work? Or would moving the edge.0 addf to the bottom of the list, just before the 5i25 writes be enough delay? I'll go give that a shot but its looking like a pair of edges might be needed, with the 2nd one triggering on the recovery edge of the first one. Thanks Andy. > > Thanks Andy. > > Cheers, Gene Heskett Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
