That imgbox URL came up with some pretty nasty virus installation photos with girly pictures and then Virus alert message boxes. Don't click on those. John
> -----Original Message----- > From: Roland Jollivet [mailto:[email protected]] > Sent: March-02-19 3:19 AM > To: Enhanced Machine Controller (EMC) > Subject: [Emc-users] Can bus query > > I have come across a number of 24VAC traction motors from BT pallet > lifters. About 4kW > > They use a controller that runs off a canBus. There is no encoder on the > motor. > These are not Servo drives as such, but can drive the motor in voltage or > torque mode. > > Is it practical to try and use these as servos? > Mount an encoder on the motor and LCNC completes the servo loop? > > http://imgbox.com/rDGX1ayn > http://imgbox.com/cNEavmIg > > It sounds like a lot of work to me. > > Regards > Roland > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
