On Tue, 29 Jan 2019, Gene Heskett wrote:
Date: Tue, 29 Jan 2019 20:30:14 -0500
From: Gene Heskett <[email protected]>
Reply-To: "Enhanced Machine Controller (EMC)"
<[email protected]>
To: [email protected]
Subject: [Emc-users] For PCW
Peter;
I got one of the panels cut, stuck a line cord gland and a line cord
feeding a 5 volt and a 12 volt supply for field power, hooked it up. But
I see no hints of the 7i76 in the dmesg or halmeter menu's.
So I poked at it with mesaflash, again w/o finding much. Asking
for --serial, I get:
SSLBP VERSION 1.43
SSLBP CHANNELS 4
SSLBP baud rate 250 kilobaud.
I've put the 5i25_7i76_1px2d.bit file in the 5i25 in the G0704's Dell.
And I do see a #1 pwmgen out of p2.
Shouldn't I be seeing more evidence of the 7i76? I've no clue how to
address it in the .hal files.
Yes, but you need field power (say 12 or 24V) on the isolated I/O section
( orange connector) for the 7I76 I/O pins to show up
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
