On 12/15/18 5:48 AM, nkp216 wrote:
Has anyone ever had experience setting up (source code editing) Axis
(gremlin) for horizontal boring machines?
https://imgur.com/gallery/m8UhfDJ
Now 3d view is not very convenient.
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
I don't know if this addresses your issue, but VisMach is pretty easy to
visualize the placement and motion of machine parts.
http://linuxcnc.org/docs/html/gui/vismach.html
For me, the real problem is in representing the tool path. After looking
at OpenGL, tool control point issues, and 3D graphics in general
(elements in space, and viewpoint of the space), it seemed to me that
just defining the problem was a big hurdle.
Old information (red herring and rabbit hole warning):
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Gremlin
Handling the three XYZ linear space is fairly easy. Defining the
graphics for rotary or other additional axes seems to be an order of
magnitude harder, and there don't seem to be any examples to copy from.
--
Kirk Wallace
http://www.wallacecompany.com/machine_shop/
http://www.wallacecompany.com/E45/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
