I think Gene might be talking about "aviation sockets" If so then use blue Locktite and a wrench and they will never come loose or spin. Use the blue stuff on the socket, threads and nut. Not just as a thread lock but use it to stick the socket to the chassis. Some of the stuff might squeeze out when you turn the nut, just wipe it off with paper towel. Years from now you will need to tap it with a screwdriver handle to remove it.
On Tue, Dec 4, 2018 at 3:49 PM andy pugh <[email protected]> wrote: > On Tue, 4 Dec 2018 at 23:44, Gene Heskett <[email protected]> wrote: > > > So in my mind, the hole in the panel should be of a size that when the > > socket is installed in the hole, this wire will be squeezed into the > > hole of the socket such that the nut, installed bare, with this wire > > against the sockets flange, and ther nut drawn up, the socket will be > > pulled into the hole converting the wire into a taperlock resembling > > method to prevent the socket from turning > > I suspect not, I would think it is more likely that the wire washers > were cheaper and they don't care that they don't work. > > What connectors? Made by whom? > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1916 > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Chris Albertson Redondo Beach, California _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
