Many Digital servo drives can be configured for simple motion moves via
their internal logic. Automation Direct and Teco servo drives can do
that. You can trigger the motion with digital I/O. The motion is
basic but that may be all you need.
Dave
On 3/28/2018 11:15 AM, Marius Liebenberg wrote:
Hi all
I have to put together a system that will use one servo to drive a
small platform over a distance of 6m at a speed of about 25km/h or
8m/s or there about.
I feel that using a full computer and mesa card for just one axis that
does not need a display sounds a bit excessive. The question is what
are the other options if any.
-----------------------------
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
