Is there a similar quality unit that works with Windows? > -----Original Message----- > From: Chris Albertson [mailto:[email protected]] > Sent: Friday, November 10, 2017 11:04 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Touchegg with LCNC - Linux multitouch gesture > recognizer > > This does not have to be on a touch screen. It works on a conventional > track pad. The problem is most trackpads or such incredibly low quality. > Good ones are expensive. I use one of these daily: > https://www.amazon.com/gp/product/B003XLYAWC/ref=ask_ql_qh_dp_hza > > If you are a machinist they are interesting devices because they are > milled from aluminum billets then sand blasted to remove the machine tool marks. > The top surface is covered with a very thin 1mm layer of glass with a > ground surface to remove "stickiness" > > Logitec also makes some but they cost more and are not as well made, > just typical plastic trackpads. > https://www.amazon.com/LOG910003057-Logitech-Wireless-Rechargeable- > Touchpad/dp/B0093H4WT6/ref=pd_bxgy_147_2?_encoding=UTF8&psc=1&ref > RID=9D833CWHZAT0TGHYD86M&dpID=21pCaESx4OL&preST=_SX300_QL70_& > dpSrc=detail > > > > On Thu, Nov 9, 2017 at 6:03 AM, bari <[email protected]> wrote: > > > Has anyone tried Touchegg with Linuxcnc and have any feedback on how > > well it works? > > > > https://github.com/JoseExposito/touchegg > > > > https://www.youtube.com/watch?v=28Jjf5Ak6Q0 > > > > No deb package. Libs were written by Canonical. > > > > The last time we tried multitouch with LCNC every user eventually > > asked for a keyboard and mouse. This was with a 23" LCD, so the > > problem wasn't resolution or size of the buttons. > > > > -Bari > > > > > > ------------------------------------------------------------ > > ------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > -- > > Chris Albertson > Redondo Beach, California > ---------------------------------------------------------------------- > -------- Check out the vibrant tech community on one of the world's > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
