I am trying to get NML up and running between client GUI and rest of linuxcnc run as server. I have some progress, server seems to work and there is connection from client both tkemc and axis.
Wallace claim http://www.wallacecompany.com/machine_shop/EMC2/remote_notes.html tkemc could be run as a command but neither tkemc or axis seems to make connection in this case. Starting with linuxcnc command make connection but there are a lot error messages and no graphical dispay, this is probably because also server tasks are started at the same time. Here is a second person on the same track as me http://nairobi-embedded.org/020_linuxcnc_mdi_streaming_interface.html and I also heard machinekit is on the same track although with 0MQ protocol instead of NML protocol Do anybody have a clue which command run in the linucnc script do which part of the software? Below are diagrams from manual. Diagram from machinekit, 1-2 pages down http://www.machinekit.io/docs/code/Code_Notes/#architecture-overview Linuxcnc manual on page 4 http://linuxcnc.org/docs/devel/pdf/LinuxCNC_Developer_Manual.pdf Regards Nicklas Karlsson ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
