On Thursday 02 March 2017 01:11:22 Jon Elson wrote: > On 03/01/2017 10:16 PM, Gene Heskett wrote: > > On Wednesday 01 March 2017 22:31:31 Jon Elson wrote: > > > > I also have a button that has to be held to enable jogging, > > so there will be no jitter (or movement at all) when that > > button is not being pressed. That saves me from accidents > > when I bump the MPG dial. > > > > Jon > > > > That is a concern here too, but would need another run of cat5 > > jumper cable to do. I may, in the halfile, put an activity timeout > > of say 5 seconds of allowable activity after the range switch was > > toggled off, and I am leaning toward ditching the pushbutton for a > > spring loaded to off toggle/bat handle type. > > The button connects the wiper of the axis selector switch. > So, if the button is not pushed, it selects no axis, thus > the MPG is ignored. You shouldn't need an extra wire to do > that. > > Jon
But, but, but, I don't have an axis selection switch Jon, I will have a wheel per axis. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
