Sven, please specify more detail of that machine, at least name, number etc. There is a company (koerner.net), 36456 Barchfeld (bei Bad Salzungen), Germany, making CNC machines. The motors are long, still may be steppers, i use to have similar ones (Dunker Motors), somewhat smaller.
Peter PS: look here: https://de.industryarena.com/forum/fraesmaschine-wieder-zum-leben-erwecken--80000.html, although it's in German. Am 18.02.2017 11:44, schrieb Sven Wesley: > Hi all! > > Long time no see, been busy working. :) > I bought a CNC engraver, really high quality but it has an old Dos(!) PC. > Here comes a retrofit! > The 60 000 RPM VFD is well documented, the drivers are not. The PC port > looks like a parallel port but is labelled 'com 2'. I guess the drivers are > step/dir. Anyone with a nice idea how to figure it out? > I will try to see if the factory have any manuals left. > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
