On Saturday 12 November 2016 12:02:30 Jon Elson wrote: > >> On Friday 11 November 2016 06:11:54 andy pugh wrote: > >> > >> That, and I am running out of patience with glues, these > >> AT-667's are in trenches of the mounting bracket, which > >> is made out of 7076-t6, cut dry, and the cut washed with > >> acetone, but the superglues, with days of setup time, are > >> not adequately holding the device. > > I almost never use superglue. About the only use is to tack > down patch wires on PC boards. > > Theres this stuff that comes in two metal cans called PC7. > Slow to set, but if you warm the part it sets faster. > Gorilla glue seems to work pretty well. JB Weld is also good. > > Jon > Because it has some resilency and shouldn't bounce loose from the magnetic pull pulsing, I, after seeing the 6 hour cure time on the JBWeld, went back to goop/Go-2. Clamped up 45 minutes ago, and the bracket warmed to about 135F, it should be good to take the bending of some 30 ga kynar as I paste it back onto its terminal strip. Then test. :) Film at 15:00 or so. :)
Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
