On Friday 11 November 2016 20:00:52 andy pugh wrote: > On 12 November 2016 at 00:25, Gene Heskett <[email protected]> wrote: > > There is some ambiguity in whats left of my mind as to which face is > > which. I have always assumed that the cross groove pattern face is > > the active face, is this wrong and I should turn them over so the > > smooth face is toward the gear? > > I don't know, it's been years, but this worked: > https://goo.gl/photos/LmQ1iXXmqTb3fEcs9 And thats apparently the case, you have the smooth "back" of the device toward the gears, assuming the gear is inside this cover in the pix.
So I have it all bass ackwards. The Allegro doc shows some reverse bias tolerance, at -18 volts so hopefully I haven't blown all of them since I didn't go above 9 volts looking for some results. I do have 2 spares yet, up on the shelf with the Dell running the G0704. So what do they use that molded cross in the other face for, some sort of a seating registration scheme when it in a vehicle part? And I just found a callout pointed to the branded face, on page 13 of the docs. I have got to get a better magnifying glass, or get my cataracts removed. Thanks Andy, you rescued me again. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
