I know during testing at some point the G0 -> Feed moves and feed moves -> G0 were exact stop. I think it was changed to make it act like it did with the previous TP. My thoughts at the time was to make it a hal pin or maybe a INI setting.
sam On 11/3/2016 2:58 PM, Todd Zuercher wrote: > I thought that G0 moves were supposed to be pure positioning moves??? My > assumption was that a series of G0 moves would behave exactly as if they were > G1 moves at the max feed-rate in G61 mode regardless of the actual G61/G64 > setting. To day it was shown to me that this is not the case. As it turns out > they are in fact blended in G64 mode just as any other move. > > Most other controls I've worked with G0 moves are pure positioning moves > (move to exact point). > > This seems like a bug to me. > ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
