An industrial PC board may work. A quick google for newest motherboard with ISA
slot turned up ones like a IEI IMBA-G412ISA-R20 G41 which takes an LGA775 Core
2 (1 to 4 core) CPU and has one ISA, one ISA/PCI, four PCI and one PCIe x16
slot.
Another option is the MB-P4BWA. One less PCI slot, replaced with another PCIe
and looks like it also has a Mini PCI slot. 6x SATA ports and dual gigabit LAN
among other features. Also an LGA775 CPU.
There are others, looks like the newest CPU you'll find on a board with ISA
slots is LGA775 and to buy a new board will cost $130 and up, up, UP. Find the
board you want then hunt for a deal on a used one.
A server board may be usable, though they tended to not have the fast slots
like VLB, AGP or PCIe for video, while retaining other old standards longer
than boards for the office and consumer markets.
From: Sebastian Kuzminsky <[email protected]>
To: Enhanced Machine Controller (EMC) <[email protected]>
Sent: Friday, October 28, 2016 10:20 AM
Subject: Re: [Emc-users] update from 2.8 pre ja9 to latest on ubuntu 10.04 ...
pyton3 problem??
On 10/28/2016 09:50 AM, Todd Zuercher wrote:
> I find this a little troubling, as I have at least one machine that I
> have not been able to get the live image for Wheezy to run on. It is
> an older P4 machine and my attempts to try Wheezy on it have failed
> miserably, it boots but then crashes hard when I try to open a
> latency test. Unfortunately upgrading the motherboard on this will
> be very problematic, as it is using an old ISA bus card to interface
> with the cnc machine.
I'm sorry to hear about that problem. We tried to ensure that our
Wheezy RTAI kernel worked on as many old computers as we could, but
clearly there were some that we failed to support.
------------------------------------------------------------------------------
The Command Line: Reinvented for Modern Developers
Did the resurgence of CLI tooling catch you by surprise?
Reconnect with the command line and become more productive.
Learn the new .NET and ASP.NET CLI. Get your free copy!
http://sdm.link/telerik
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
