What size chuck on the 4th axis? PARAKKEL PORT whomever typed up that label
didn't proofread :-)
From: Ron Ginger <[email protected]>
To: [email protected]
Sent: Sunday, August 28, 2016 2:48 PM
Subject: Re: [Emc-users] LinuxCNC officially rocks
On 8/28/2016 11:38 AM, [email protected] wrote:
> Hi Ron. We met at one of your PA cocofests decades ago. I'd like to
> google for that machine, but I'd likely put linuxcnc in it as I'm
> moderately familiar with it. Name of machine please?
>
> Thanks.
The one I got is http://www.ebay.com/itm/321887320580 There seem to be
several vendors with the same unit. I ordered from galaxyond. The web
page says they ship from CA, but mine came from NJ and was here in just
4 days.
I am running it with Mach4. It simply has a db25 connector on the back,
so anything that acts like a parallel port will drive it. I still do not
have the pins sorted out for the spindle control, but I did find the
stepper connections. They supply a manual with it that shows all the
mach3 screens for config so you can pick off the necessary pins numbers
and steps per unit.
ron ginger
------------------------------------------------------------------------------
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
