On Wednesday 27 July 2016 23:30:21 Todd Zuercher wrote: > ----- Original Message ----- > From: "Gene Heskett" <[email protected]> > To: [email protected] > Sent: Wednesday, July 27, 2016 8:41:09 PM > Subject: Re: [Emc-users] Nother Q about these Chinese inverters > > On Wednesday 27 July 2016 11:26:55 Gene Heskett wrote: > > I got everything hauled to the scene except my clamshell digger. > Plumb wore the old man out. The rider had a flat tire that did NOT > want to re-seat and hold air. Needs new rear tires, guessing 25 yo & > badly weatherchecked. And them'er $50/copy. Sigh. OTOH, I am still > looking down at the grass. :) > > Cheers, Gene Heskett
Your reply got auto snipped Todd, as it was all below my sig separator! To summerize, I did all of that, but I had to bring my 4 ton rated handyman around to pick it up, and its weight combined with my bad back, collapsed disks, I hurt myself pretty good by the time I actually had air in it again. A bit of time in the sack, and one of my near beers and I think I can walk back to the kitchen and make some leftover chinese food disappear. Then tonight is put out the trash night, which I did very very carefully. I expect it will be flat again in the morning as my last mowing took me across some rosebush runners which probably perforated it several more times. I've been considering fresh tires on the back for at least a year as the knobs they used to have for tread are now about 1/16" high and are surrounded by visible carcass threads. I've now replaced both front tires in the last year, for the same reason. Stems check fine, but the air leaves anyway. Cheers Todd, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
