I would use 1 - 7i80 and 1 - 7i44 Then you can use a bunch of 7i69's (each has 2 50 pin connectors)
On 5/31/2016 8:36 AM, Rick Lair wrote: > Good Morning Guys, > > I was wondering, is it possible to run 3 7i80HD's off of one PC. > > We have an Okuma bridge mill that we just installed, and it has an off > brand retrofitted control on it, that we are having problems getting > running. When it was retrofitted they used Opto22 I/O boards, and there > are 6 of them, so I was figuring 3 7i80HD's or even 3 5i23's would allow > me to hook up all 6 I/O boards along with a 7i48 to control the servo's > and encoder feedback. > > ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
