I realized at least part of the [XHC_HB04_CONFIG] section just isn't
having an effect. I can't figure out why.
I noticed before that "sequence =2" (before it was commented out) had no
effect at all. I saw I could specify "-s 3" on the loadusr line so it
didn't matter.
I did end up with the handwheel going CW, which increases X and Y,
actually decreases Z. That's not right. I figure that "scales" can fix
that by making the third number -1. That should work, right?
It's not having any effect. And unlike sequence, there's no loadusr line
option for scale.
Any idea why this isn't having any effect?
Danny
[XHC_HB04_CONFIG]
threadname = servo-thread
#(optional, default: servo-thread)
layout = 2
# (optional, 1: 16 buttons | 2: 18 buttons, default: 2)
coords = x y z
# (optional, 4 max, default: x y z a)
coefs = 1 1 1 1
# (optional, filter coefs 0 < coef < 1, default: 1 1 1 1)
#mpg_accels = 1 2 2 200
mpg_accels = 1 2 100
# (optional: reduced accelerations for all manual mode jogging)
# (in machine_units/sec/sec like
[AXIS_n]MAX_ACCELERATION)
# (this option requires: [APPLICATIONS]APP =
xhc-hb04-accels)
scales = 1 1 1
# (optional, plus/minus factors, default: 1 1 1 1)
require_pendant = no
# (optional, yes | no, default: yes)
inch_or_mm = in
# (optional, in | mm for display icon, default: mm)
jogmode = normal
# (optional, normal | vnormal | plus-minus, default: normal)
#sequence=2
# (optional, 1 | 2 | 3 | 4 | 5, default: 1)
# 1: 0.001,0.010,0.100,1.000 (typ for mm machine)
# 2: 0.001,0.005,0.010,0.020 (typ for inch
machine)
# 3: 0.001,0.010,0.100
# 4: 0.001,0.005,0.010,0.020,0.050,0.100
# 5: 0.001,0.010,0.050,0.100,1.000
------------------------------------------------------------------------------
Find and fix application performance issues faster with Applications Manager
Applications Manager provides deep performance insights into multiple tiers of
your business applications. It resolves application problems quickly and
reduces your MTTR. Get your free trial!
https://ad.doubleclick.net/ddm/clk/302982198;130105516;z
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
