I share everything... except my wife. http://gnipsel.com/linuxcnc/index.html
Look in the HAL Examples JT On 4/21/2016 4:53 PM, Jim Craig wrote: > John, > > Thanks for all of the help and information. Would you mind sharing your > alignment subroutines also? o<align-start> , o<align-y>, o<align-x>, > o<clear-offsets>. > > This setup will be very similar your setup with two parports. > > Thanks again, > > Jim > > > On 4/21/2016 3:52 PM, John Thornton wrote: >> It was suggested that I do that by PCW many times. I assume better >> following of the tip voltage but I can't measure the difference. >> >> JT >> >> On 4/21/2016 3:23 PM, Jim Craig wrote: >>> Yep sure enough those values are in the manual. It is a Thermal Dynamics >>> Cutmaster 52. >>> >>> What are the improvements of the thc-pid vs the thc component? >>> >>> Thanks >>> >>> Jim >>> >>> >>> On 4/21/2016 2:46 PM, John Thornton wrote: >>>> Those values will be in the cut charts for your plasma cutter. It's >>>> different with different materials and thicknesses and varies with >>>> plasma torches too. What kind of plasma cutter do you have? >>>> >>>> Forgot the postgui.hal part, I've updated the page and also added my >>>> entire configuration. >>>> >>>> JT >>>> >>>> On 4/21/2016 1:17 PM, Jim Craig wrote: >>>>> More questions. So are you still using the o<touchoff> subroutine to >>>>> probe the material before each cut? >>>>> >>>>> If so I will go back to my original questions what are some good typical >>>>> starting values for pierce height, pierce delay, and cut height? >>>>> >>>>> Is the thc-pid comp significantly better than the thc comp? >>>>> >>>>> What do you use to enable and disable the thc? Do you use a gcode to set >>>>> the enable pin? I don't see anywhere in the sample HAL file where you >>>>> have anything connected to the thc-pid.enable pin. >>>>> >>>>> Thanks, >>>>> >>>>> Jim >>>>> >>>>> On 4/21/2016 12:06 PM, John Thornton wrote: >>>>>> Silly typo... links fixed now. >>>>>> >>>>>> JT >>>>>> >>>>>> On 4/21/2016 11:25 AM, Jim Craig wrote: >>>>>>> If you are referring to theTHCAD PID Configuration Files >>>>>>> <http://www.mesaus.com/info/thc-pid.zip> >>>>>>> >>>>>>> the link appears to be broken. >>>>>>> >>>>>>> Thanks, >>>>>>> >>>>>>> Jim >>>>>>> >>>>>>> >>>>>>> On 4/21/2016 10:55 AM, John Thornton wrote: >>>>>>>> I added the info to the Links page here http://www.mesaus.com/ >>>>>>>> >>>>>>>> JT >>>>>>>> >>>>>>>> On 4/20/2016 4:39 PM, Jim Craig wrote: >>>>>>>>> John, >>>>>>>>> >>>>>>>>> I have been looking at your o<touchoff> subroutine. I plan on using it >>>>>>>>> on the plasma cutter I am building with a buddy. My question is what >>>>>>>>> are >>>>>>>>> typical values that you are using for pierce height, pierce delay and >>>>>>>>> cut height? >>>>>>>>> >>>>>>>>> Do you switch to THC after the o<touchoff> subroutine? If so what are >>>>>>>>> you using to toggle the thc.enable pin? Are you using an M62-M65 >>>>>>>>> command >>>>>>>>> to to toggle the thc.enable? >>>>>>>>> >>>>>>>>> Thanks, >>>>>>>>> >>>>>>>>> Jim >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ------------------------------------------------------------------------------ >>>>>>>>> Find and fix application performance issues faster with Applications >>>>>>>>> Manager >>>>>>>>> Applications Manager provides deep performance insights into multiple >>>>>>>>> tiers of >>>>>>>>> your business applications. It resolves application problems quickly >>>>>>>>> and >>>>>>>>> reduces your MTTR. Get your free trial! >>>>>>>>> https://ad.doubleclick.net/ddm/clk/302982198;130105516;z >>>>>>>>> _______________________________________________ >>>>>>>>> Emc-users mailing list >>>>>>>>> [email protected] >>>>>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>>>> ------------------------------------------------------------------------------ >>>>>>>> Find and fix application performance issues faster with Applications >>>>>>>> Manager >>>>>>>> Applications Manager provides deep performance insights into multiple >>>>>>>> tiers of >>>>>>>> your business applications. It resolves application problems quickly >>>>>>>> and >>>>>>>> reduces your MTTR. Get your free trial! >>>>>>>> https://ad.doubleclick.net/ddm/clk/302982198;130105516;z >>>>>>>> _______________________________________________ >>>>>>>> Emc-users mailing list >>>>>>>> [email protected] >>>>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>>>> >>>>>>> ------------------------------------------------------------------------------ >>>>>>> Find and fix application performance issues faster with Applications >>>>>>> Manager >>>>>>> Applications Manager provides deep performance insights into multiple >>>>>>> tiers of >>>>>>> your business applications. It resolves application problems quickly and >>>>>>> reduces your MTTR. Get your free trial! >>>>>>> https://ad.doubleclick.net/ddm/clk/302982198;130105516;z >>>>>>> _______________________________________________ >>>>>>> Emc-users mailing list >>>>>>> [email protected] >>>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>> ------------------------------------------------------------------------------ >>>>>> Find and fix application performance issues faster with Applications >>>>>> Manager >>>>>> Applications Manager provides deep performance insights into multiple >>>>>> tiers of >>>>>> your business applications. It resolves application problems quickly and >>>>>> reduces your MTTR. Get your free trial! >>>>>> https://ad.doubleclick.net/ddm/clk/302982198;130105516;z >>>>>> _______________________________________________ >>>>>> Emc-users mailing list >>>>>> [email protected] >>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>> >>>>> ------------------------------------------------------------------------------ >>>>> Find and fix application performance issues faster with Applications >>>>> Manager >>>>> Applications Manager provides deep performance insights into multiple >>>>> tiers of >>>>> your business applications. It resolves application problems quickly and >>>>> reduces your MTTR. Get your free trial! >>>>> https://ad.doubleclick.net/ddm/clk/302982198;130105516;z >>>>> _______________________________________________ >>>>> Emc-users mailing list >>>>> [email protected] >>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> ------------------------------------------------------------------------------ >>>> Find and fix application performance issues faster with Applications >>>> Manager >>>> Applications Manager provides deep performance insights into multiple >>>> tiers of >>>> your business applications. It resolves application problems quickly and >>>> reduces your MTTR. Get your free trial! >>>> https://ad.doubleclick.net/ddm/clk/302982198;130105516;z >>>> _______________________________________________ >>>> Emc-users mailing list >>>> [email protected] >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> >>> ------------------------------------------------------------------------------ >>> Find and fix application performance issues faster with Applications Manager >>> Applications Manager provides deep performance insights into multiple tiers >>> of >>> your business applications. It resolves application problems quickly and >>> reduces your MTTR. Get your free trial! >>> https://ad.doubleclick.net/ddm/clk/302982198;130105516;z >>> _______________________________________________ >>> Emc-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/emc-users >> ------------------------------------------------------------------------------ >> Find and fix application performance issues faster with Applications Manager >> Applications Manager provides deep performance insights into multiple tiers >> of >> your business applications. It resolves application problems quickly and >> reduces your MTTR. Get your free trial! >> https://ad.doubleclick.net/ddm/clk/302982198;130105516;z >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ > Find and fix application performance issues faster with Applications Manager > Applications Manager provides deep performance insights into multiple tiers of > your business applications. It resolves application problems quickly and > reduces your MTTR. Get your free trial! > https://ad.doubleclick.net/ddm/clk/302982198;130105516;z > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
