On 13 January 2016 at 18:41, John Dammeyer <[email protected]> wrote:
>> My lathe does not seem to struggle at all with turning cuts within the >> torque limit of the spindle, but stall immediately if trying to push a >> drill > 10mm. >> > What are you running on the lead screw? Direct or belt drive? What size > motor? What type of driver? What power supply voltage? Lead screw pitch? > Size of lathe? It's a Chinese 9x20 with a 3.5Nm stepper, 2:1 belt drive 20mm ballscrew with 5mm pitch running at 28V and a generic black-aluminium-box drive. Not one item of which is the way I would do it now. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
