Sorry, that is MD I command. You should see the tool number at the bottom of the axis screen.
If there is no tool number listed there, you dont you don't get the "tool table" option in the touch off screen. On Jun 6, 2015 7:07 AM, "jrmitchellj ." <[email protected]> wrote: > You have to installed a tool in the machine using the "T#M6" in mid so > LCNC knows what tool it has to work on. > > Ray > On Jun 6, 2015 7:02 AM, "andy pugh" <[email protected]> wrote: > >> On 6 June 2015 at 14:12, Matt Shaver <[email protected]> wrote: >> > It's been a long time since I worked with this... What has to be >> > declared in the .ini or .hal files to inform Axis that there should be >> > a "Tool Table" option in the touch off dialog? >> >> It is either a "T" at the end of the coordinate system list, or a >> completely separate button in Axis. >> >> >> -- >> atp >> If you can't fix it, you don't own it. >> http://www.ifixit.com/Manifesto >> >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
