On 01/23/2015 09:51 PM, Peter Blodow wrote: > Max, > from the servotogo site, I can't quite see how the cards are used. There > are a keyboard and an ethernet jack plus 4 ISA slots. What fits into > these, and how are the cards used? What else is neded to put thew things > to work? The servotogo site gives me lots of error messages when I try > to read their manual. And where are you located? > > The servo to go board I used years ago, which I THINK is the board we are talking about, is the SECOND picture on their web site. it plugs into an ISA slot, and can control up to 4 or 8 axes. It has a US Digital encoder counter chip and a DAC, plus a header for some TTL digital I/O. The card in their picture is obviously an updated version of what I had, mine had no Xilinx FPGA or CPLD on it.
I don't know what the top picture is, but it may allow you to use up to 4 of their motion interface boards from ethernet. It may have some sort of Arduino or similar CPU in that mezzanine board. I couldn't get the docs for that board to work. Jon ------------------------------------------------------------------------------ New Year. New Location. New Benefits. New Data Center in Ashburn, VA. GigeNET is offering a free month of service with a new server in Ashburn. Choose from 2 high performing configs, both with 100TB of bandwidth. Higher redundancy.Lower latency.Increased capacity.Completely compliant. http://p.sf.net/sfu/gigenet _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
