we have some BERGER LAHR drives with large 5 phase steppers.. As they have gone bad - we have replace the drive/stepper as replacements are very expensive.
sam On 02/24/2014 02:37 PM, Viesturs Lācis wrote: > Hello! > > Can anyone suggest a reasonable driver for 5 phase stepper motors? > Motor dimensions are slightly larger than Nema42 standard, there is zero > documentation available and there are no labels on motors themselves, so I > have no idea about the phase current requirements. I guess that something > around 6A might be ok. > > Viesturs > ------------------------------------------------------------------------------ > Flow-based real-time traffic analytics software. Cisco certified tool. > Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer > Customize your own dashboards, set traffic alerts and generate reports. > Network behavioral analysis & security monitoring. All-in-one tool. > http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Flow-based real-time traffic analytics software. Cisco certified tool. Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer Customize your own dashboards, set traffic alerts and generate reports. Network behavioral analysis & security monitoring. All-in-one tool. http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
