great, I was not aware of those capabilities. really nice. I will study remap.
Bruno On 2/10/14 1:56 PM, [email protected] wrote: > Date: Mon, 10 Feb 2014 12:56:26 +0000 From: andy pugh > <[email protected]> Subject: Re: [Emc-users] rack toolchanger ? To: > "Enhanced Machine Controller (EMC)" <[email protected]> > Message-ID: > <CAN1+YZUrAgzti5=-e9cby49n-dxat3o1fuk2t+1hz-dzoyw...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 On 10 February 2014 > 12:19, bruno <[email protected]> wrote: >> >I do not see mention of the rack toolchanger >> >http://wiki.linuxcnc.org/cgi-bin/wiki.pl?RackToolChanger >> > >> >in the current INI documentation. Has this been integrated in 2.5.x ? > No, it failed to cover enough variations in toolchanger. > > Look at the rack-toolchanger remapping example in Master > sim/axis/remap/rack_toolchange > or:http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=tree;f=configs/sim/axis/remap/rack-toolchange;h=7d5c0d5565eba0b3565facc36ea035d0a347d32c;hb=9f6c219475924cb92a57a3f23b6f45d437668d3d > > http://www.linuxcnc.org/docs/devel/html/remap/structure.html ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
