Hi Gene - by: John: You need finer grained control than an index generator will ever > allow if you ever intend to use the G33.1 or G76 thread cutting on the > lathe, and once I had that working, I don't know why I ever considered not > doing it.
I presume you mean the one pulse per rev that Mach users seem to be stuck with. Code for encoder wheel came through, by the way. I did measure the spindle diameter (not by lathe right now) so can not comment on how well it'll fit with your GCode. The Emco (Austrian, Enco is Asian) will be running with a 3 phase motor and inverter - already here, just waiting to be installed. The inverter takes 0-10v for the spindle - so that's good. This is all interesting! Thank you - John A. Stewart ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
